{"title":"Spare parts for Dualtron","description":null,"products":[{"product_id":"zunanja-pnevmatika-10x2-75-6-5-za-elektricni-skiro-dualtron-3","title":"10 × 2.75-6.5 tubeless tire for Dualtron 3 electric scooter","description":"\u003ch2\u003eNew tread pattern for daily rides with your Dualtron 3 electric scooter\u003c\/h2\u003e\u003cp\u003eThe 10 × 2.75-6.5 black tire for the Dualtron 3 features low tread blocks and transverse channels. The TUBELESS marking on the sidewall confirms it is a tubeless design, requiring a suitable tubeless rim and valve for proper sealing. This outer tire replaces a worn or damaged one; the rim is not included.\u003c\/p\u003e\u003ch3\u003eFeatures and dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize designation: 10 × 2.75-6.5.\u003c\/li\u003e\n\u003cli\u003eVehicle model: Dualtron 3; compare the overall dimensions and rim design.\u003c\/li\u003e\n\u003cli\u003eType: Tubeless, black tire with a low-block tread profile.\u003c\/li\u003e\n\u003cli\u003eApproximate outer diameter: 240 mm.\u003c\/li\u003e\n\u003cli\u003eApproximate inner diameter: 161 mm.\u003c\/li\u003e\n\u003cli\u003eApproximate width: 83 mm.\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 726.6 g.\u003c\/li\u003e\n\u003cli\u003eCarcass material: NYLON.\u003c\/li\u003e\n\u003cli\u003eThe arrow on the sidewall indicates the direction of rotation.\u003c\/li\u003e\n\u003cli\u003eMarked maximum tire load: 85 kg (187 lb) at 45 PSI (300 kPa). This figure does not determine the load capacity of the entire scooter or its recommended pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen to replace and how to install it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the tire when the tread is heavily worn or if there are cracks, bulges, or damaged edges. Also check for clearance near the fender and brake.\u003c\/li\u003e\n\u003cli\u003eRelease all air before disassembly. Clean the rim edge, check the valve, and install the new tire in the marked direction of rotation without damaging the sealing edge.\u003c\/li\u003e\n\u003cli\u003eEnsure even seating around the entire circumference and proper sealing. Set the pressure according to vehicle instructions and the limits of the tire and rim; check it again before the next ride.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829556031753,"sku":"ULP5879.00","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/188357a1315942cfbe6174472d7c305e_7c0c6381-9601-4ca0-9e81-63053463ddef.jpg?v=1771435172"},{"product_id":"zunanja-pnevmatika-10x2-75-6-5-za-elektricni-skiro-dualtron-spider","title":"Tubeless 10 × 2.75-6.5 tire for Dualtron Spider electric scooter","description":"\u003ch2\u003eNew tread for daily commutes with the Dualtron Spider electric scooter\u003c\/h2\u003e\u003cp\u003eThe black 10 × 2.75-6.5 tire for the Dualtron Spider features low tread blocks and cross channels. The TUBELESS marking on the sidewall confirms this is a tubeless design, which requires a compatible tubeless rim and valve for proper sealing. This outer tire replaces a worn or damaged tire; the rim is not included.\u003c\/p\u003e\u003ch3\u003eFeatures and Dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize designation: 10 × 2.75-6.5.\u003c\/li\u003e\n\u003cli\u003eVehicle model: Dualtron Spider; compare overall dimensions and rim design.\u003c\/li\u003e\n\u003cli\u003eDesign: tubeless, black tire with low block profile.\u003c\/li\u003e\n\u003cli\u003eApproximate outer diameter: 240 mm.\u003c\/li\u003e\n\u003cli\u003eApproximate inner diameter: 161 mm.\u003c\/li\u003e\n\u003cli\u003eApproximate width: 83 mm.\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 726.6 g.\u003c\/li\u003e\n\u003cli\u003eLoad construction designation: NYLON.\u003c\/li\u003e\n\u003cli\u003eThe arrow on the sidewall indicates the direction of rotation.\u003c\/li\u003e\n\u003cli\u003eMarked maximum tire load: 85 kg (187 lb) at 45 PSI (300 kPa). This information does not determine the load capacity of the entire scooter or its recommended tire pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen to replace and how to install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the tire if the tread is heavily worn, or if there are cracks, bulges, or a damaged bead. Also check for clearance near the fender and brake.\u003c\/li\u003e\n\u003cli\u003eRelease all air before removal. Clean the rim edge, check the valve, and install the new tire in the marked direction of rotation, taking care not to damage the sealing edge.\u003c\/li\u003e\n\u003cli\u003eCheck for even seating around the entire circumference and proper sealing. Set the pressure according to the vehicle's manual and the tire\/rim limitations; recheck before your next ride.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829556064521,"sku":"ULP5879.00","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/188357a1315942cfbe6174472d7c305e_3c34d04b-3435-4f08-92c7-1f36a261b141.jpg?v=1771435174"},{"product_id":"zavorne-ploscice-magura-mt5mt7-hidravlicne-zavore-za-dualtron-thunder","title":"Organic brake pads for Dualtron Thunder with Magura MT5\/MT7 caliper","description":"\u003ch2\u003eOrganic brake pad for Magura MT5\/MT7\u003c\/h2\u003e\u003cp\u003eThe pair of organic brake pads is intended for the Dualtron Thunder electric scooter equipped with the appropriate Magura MT5, MT5e, or MT7 caliper. Each black backing plate has two friction zones and an upper mounting tab.\u003c\/p\u003e\u003ch3\u003eFeatures and dimensions\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eBrake compound: organic, resin-based.\u003c\/li\u003e\n\n\u003cli\u003eVehicle: Dualtron Thunder with appropriate Magura MT5\/MT5e\/MT7 brake.\u003c\/li\u003e\n\n\u003cli\u003eTwo backing plates; two friction surfaces on each.\u003c\/li\u003e\n\n\u003cli\u003eBlack backing and extended mounting tabs.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cp\u003eFitment is determined by the installed caliper. Before selecting, compare the brake marking, the shape of the old pads, and the mounting method. For a modified scooter, consider the installed brake; pads for a different stock caliper are not interchangeable just because of the same vehicle model.\u003c\/p\u003e\u003ch3\u003eReplacement and bedding-in\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eReplace the pair when the pad is worn, damaged, or contaminated with oil. Also check the condition of the disc and the minimum allowable pad thickness according to the brake instructions.\u003c\/li\u003e\n\n\u003cli\u003eRemove the safety clip and the old pads. After the caliper service procedure, prepare the space for the new pair, install the pads with the appropriate spring, and re-secure the mounting. Do not touch the friction surfaces with greasy hands.\u003c\/li\u003e\n\n\u003cli\u003eAdjust the position of the caliper or the gap between the pads. Check the lever response and free spinning of the wheel, then bed in the brakes with several gradual slow-downs on a safe surface.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829557047561,"sku":"ULP174.54","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/227ebd0f765246c5ad52032004f37399.jpg?v=1771435210"},{"product_id":"zavorne-ploscice-magura-mt5mt7-hidravlicne-zavore-za-dualtron-storm","title":"Organic brake pads for Dualtron Storm with Magura MT5\/MT7 caliper","description":"\u003ch2\u003eOrganic pads for Magura MT5\/MT7 brakes\u003c\/h2\u003e\u003cp\u003eThe pair of organic brake pads is designed for the Dualtron Storm electric scooter equipped with a compatible Magura MT5, MT5e, or MT7 caliper. Each black backing plate has two friction zones and an upper mounting tab.\u003c\/p\u003e\u003ch3\u003eFeatures and dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrake pad: organic, resin-based.\u003c\/li\u003e\n\u003cli\u003eVehicle: Dualtron Storm with compatible Magura MT5\/MT5e\/MT7 brake.\u003c\/li\u003e\n\u003cli\u003eTwo backing plates; two friction surfaces each.\u003c\/li\u003e\n\u003cli\u003eBlack back and extended mounting tabs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility is determined by the installed caliper. Before selecting, compare the brake designation, the shape of the old pads, and the mounting method. For modified scooters, consider the specific brake installed; pads for a different standard caliper are not interchangeable just because the vehicle model is the same.\u003c\/p\u003e\u003ch3\u003eReplacement and bedding-in\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the pair if the lining is worn, damaged, or contaminated with oil. Also check the condition of the disc and the minimum allowable lining thickness according to the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the retaining pin and old pads. After the caliper service procedure, prepare space for the new pair, install the pads with the appropriate spring, and re-secure them. Do not touch the friction surfaces with oily hands.\u003c\/li\u003e\n\u003cli\u003eAdjust the caliper position or pad gap. Check the lever response and free wheel rotation, then bed in the brakes with several gradual stops on a safe surface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829557080329,"sku":"ULP174.54","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/227ebd0f765246c5ad52032004f37399_aa36bed5-ab30-49c4-9991-ac2b833eba17.jpg?v=1771435211"},{"product_id":"zavorne-ploscice-magura-mt5mt7-hidravlicne-zavore-za-dualtron-ultra-2","title":"Organic brake pads for Dualtron Ultra 2 with Magura MT5\/MT7 calipers","description":"\u003ch2\u003eOrganic pads for Magura MT5\/MT7 brakes\u003c\/h2\u003e\u003cp\u003eThe pair of organic brake pads is designed for the Dualtron Ultra 2 electric scooter equipped with a compatible Magura MT5, MT5e, or MT7 caliper. Each black carrier plate features two friction areas and an upper mounting tab.\u003c\/p\u003e\u003ch3\u003eFeatures and dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrake compound: organic, resin-based.\u003c\/li\u003e\n\u003cli\u003eVehicle: Dualtron Ultra 2 with compatible Magura MT5\/MT5e\/MT7 brake.\u003c\/li\u003e\n\u003cli\u003eTwo carrier plates; two friction surfaces on each.\u003c\/li\u003e\n\u003cli\u003eBlack backing plate and extended mounting tabs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment is determined by the installed caliper. Before selecting, compare the brake designation, the shape of the old pads, and the attachment method. For customized scooters, observe the installed brake; pads for a different stock caliper are not interchangeable simply due to the same vehicle model.\u003c\/p\u003e\u003ch3\u003eReplacement and bedding in\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the pair when the pad material is worn, damaged, or contaminated with oil. Also check the disc condition and the minimum allowed pad thickness according to the brake's instructions.\u003c\/li\u003e\n\u003cli\u003eRemove the retainer and the old pads. Following the caliper service procedure, prepare the space for the new pair, install the pads with the appropriate spring, and secure the attachment again. Do not touch friction surfaces with greasy hands.\u003c\/li\u003e\n\u003cli\u003eAdjust the caliper position or pad gap. Check the lever response and free wheel rotation, then bed in the brakes with multiple gradual stops on a safe surface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829557113097,"sku":"ULP174.54","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/227ebd0f765246c5ad52032004f37399_a3c82880-fe1f-43e6-97de-56ee62f835d3.jpg?v=1771435213"},{"product_id":"zavorne-ploscice-magura-mt5mt7-hidravlicne-zavore-za-dualtron-x2","title":"Organic brake pads for Dualtron X2 with Magura MT5\/MT7 caliper","description":"\u003ch2\u003eOrganic brake pads for Magura MT5\/MT7\u003c\/h2\u003e\u003cp\u003eA pair of organic brake pads designed for the Dualtron X2 electric scooter, equipped with a compatible Magura MT5, MT5e, or MT7 caliper. Each black backing plate has two friction areas and an upper mounting tab.\u003c\/p\u003e\u003ch3\u003eFeatures and dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrake pad: organic, resin-based.\u003c\/li\u003e\n\u003cli\u003eVehicle: Dualtron X2 with compatible Magura MT5\/MT5e\/MT7 brake.\u003c\/li\u003e\n\u003cli\u003eTwo backing plates; two friction surfaces on each.\u003c\/li\u003e\n\u003cli\u003eBlack backing and extended mounting tabs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment is determined by the installed caliper. Before selecting, compare the brake label, the shape of the old pads, and the mounting method. For a modified scooter, consider the installed brake; pads for a different stock caliper are not interchangeable just because the vehicle model is the same.\u003c\/p\u003e\u003ch3\u003eReplacement and bedding-in\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the pair if the lining is worn, damaged, or contaminated with oil. Also check the condition of the disc and the minimum allowed lining thickness according to the brake instructions.\u003c\/li\u003e\n\u003cli\u003eRemove the safety pin and the old pads. After servicing the caliper, prepare space for the new pair, install the pads with the appropriate spring, and re-secure the mounting. Do not touch friction surfaces with greasy hands.\u003c\/li\u003e\n\u003cli\u003eAdjust the caliper position or pad spacing. Check lever response and wheel rotation, then bed in the brakes with several gradual decelerations on a safe surface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829557145865,"sku":"ULP174.54","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/227ebd0f765246c5ad52032004f37399_872b9785-784b-4a48-bd78-cd1a680df5cb.jpg?v=1771435215"},{"product_id":"zavorne-ploscice-magura-mt5mt7-hidravlicne-zavore-za-dualtron-victor","title":"Organic brake pads for Dualtron Victor with Magura MT5\/MT7 calipers","description":"\u003ch2\u003eOrganic brake pads for Magura MT5\/MT7\u003c\/h2\u003e\u003cp\u003eThe pair of organic brake pads is intended for the Dualtron Victor electric scooter, equipped with the compatible Magura MT5, MT5e, or MT7 brake caliper. Each black backing plate features two braking surfaces and a top mounting tab.\u003c\/p\u003e\u003ch3\u003eFeatures and dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrake compound: organic, resin-based.\u003c\/li\u003e\n\u003cli\u003eVehicle: Dualtron Victor with compatible Magura MT5\/MT5e\/MT7 brake.\u003c\/li\u003e\n\u003cli\u003eTwo backing plates; two braking surfaces each.\u003c\/li\u003e\n\u003cli\u003eBlack backing and extended mounting tabs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment is determined by the installed caliper. Before selecting, compare the brake designation, the shape of the old pads, and the mounting method. If the scooter has been modified, consider the installed brake; pads for a different standard caliper are not interchangeable just because the vehicle model is the same.\u003c\/p\u003e\u003ch3\u003eReplacement and break-in\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the pair when the pad material is worn, damaged, or contaminated with oil. Also, check the condition of the brake disc and the minimum allowable pad thickness according to the brake instructions.\u003c\/li\u003e\n\u003cli\u003eRemove the retaining clip and the old pads. After servicing the caliper, clear space for the new pair, install the pads with the appropriate spring, and re-secure the mounting. Do not touch the braking surfaces with oily hands.\u003c\/li\u003e\n\u003cli\u003eAdjust the caliper position or pad clearance. Check the lever response and the wheel's free rotation, then break in the brakes with several gradual stops on a safe surface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829557178633,"sku":"ULP174.54","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/227ebd0f765246c5ad52032004f37399_5d57736c-d6cd-4007-8af0-a34232593fac.jpg?v=1771435216"},{"product_id":"ojacana-zracnica-10x2-5-z-90-ventilom-za-elektricni-skiro-dualtron-eagle-pro","title":"Reinforced 10 × 2.5 inner tube with 90° valve for Dualtron Eagle Pro electric scooter","description":"\u003ch2\u003eReinforced ULIP inner tube with a bent valve\u003c\/h2\u003e\u003cp\u003eThe 10 × 2.5 ULIP inner tube features a reinforced design and a metal valve with a 90-degree bend. It is designed for the corresponding ten-inch wheel assembly that uses an inner tube.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Eagle Pro.\u003c\/li\u003e\n\u003cli\u003eReinforced 10 × 2.5 ULIP inner tube; 90° bent valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter: 235 mm.\u003c\/li\u003e\n\u003cli\u003eInner diameter: 148 mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 43 mm.\u003c\/li\u003e\n\u003cli\u003eBent valve: 35 mm length, 90° angle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn addition to the tire size, check the direction of the valve and access to it near the motor. The valve should protrude from the rim opening without tension, with enough space to connect a pump.\u003c\/p\u003e\u003ch3\u003eReplacement without pinching the inner tube\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBefore replacing, check the tire or rim for the cause of the puncture. A foreign object, sharp edge, or damaged rim strip can damage the new inner tube immediately.\u003c\/li\u003e\n\u003cli\u003eInflate the inner tube slightly, align the valve with the opening, and distribute it evenly inside the tire. When installing the edge, do not pinch it with tire levers.\u003c\/li\u003e\n\u003cli\u003eInflate to the pressure allowed for the wheel assembly. Check the valve position and sealing; do not use valve caps to stop leaks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56829560619273,"sku":"ULP240.23","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39eb4ebe7487402ab5e781dd98bdc302_9caa79a8-852d-4d6f-a069-cdc9bae29ed5.jpg?v=1771435323"},{"product_id":"cestna-tubeless-pnevmatika-xuancheng-100-55-6-5-11-za-dualtron-thunder","title":"XUANCHENG 100\/55-6.5 TUBELESS Tire","description":"\u003ch2\u003eXUANCHENG 100\/55-6.5 TUBELESS Tire\u003c\/h2\u003e\n\u003cp\u003eUpgrade your electric scooter with the XUANCHENG 100\/55-6.5 TUBELESS tire. Designed for high-performance models and suitable for 11-inch wheels, this premium tire delivers exceptional performance and reliability.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e11-inch tubeless design for fewer punctures and easier maintenance\u003c\/li\u003e\n  \u003cli\u003ePMT-based tread pattern for superior grip\u003c\/li\u003e\n  \u003cli\u003eEnhanced grip compared to standard stock tires\u003c\/li\u003e\n  \u003cli\u003eHigh-quality construction for a longer lifespan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56831921684745,"sku":"9253","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/NEUMATICO-100_55-65-XUANCHENG-1_2608ea7c-9ca1-4e51-8209-6a8ff5945c49.webp?v=1763555815"},{"product_id":"cestna-tubeless-pnevmatika-xuancheng-100-55-6-5-11-za-dualtron-thunder-2","title":"XUANCHENG 100\/55-6.5 TUBELESS Tire","description":"\u003ch2\u003eXUANCHENG 100\/55-6.5 TUBELESS Tire\u003c\/h2\u003e\n\u003cp\u003eUpgrade your electric scooter with the XUANCHENG 100\/55-6.5 TUBELESS tire. Designed for high-performance models and suitable for 11-inch wheels, this premium tire delivers exceptional performance and reliability.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e11-inch tubeless design for fewer punctures and easier maintenance\u003c\/li\u003e\n  \u003cli\u003ePMT-based tread pattern for superior grip\u003c\/li\u003e\n  \u003cli\u003eEnhanced grip compared to standard stock tires\u003c\/li\u003e\n  \u003cli\u003eHigh-quality construction for a longer lifespan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56831922635017,"sku":"9253","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/NEUMATICO-100_55-65-XUANCHENG-1_2608ea7c-9ca1-4e51-8209-6a8ff5945c49.webp?v=1763555815"},{"product_id":"cestna-tubeless-pnevmatika-xuancheng-100-55-6-5-11-za-dualtron-thunder-3","title":"XUANCHENG 100\/55-6.5 TUBELESS Tire","description":"\u003ch2\u003eXUANCHENG 100\/55-6.5 TUBELESS Tire\u003c\/h2\u003e\n\u003cp\u003eUpgrade your electric scooter with the XUANCHENG 100\/55-6.5 TUBELESS tire. Designed for high-performance models and suitable for 11-inch wheels, this premium tire delivers exceptional performance and reliability.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e11-inch tubeless design for fewer punctures and easier maintenance\u003c\/li\u003e\n  \u003cli\u003ePMT-based tread pattern for superior grip\u003c\/li\u003e\n  \u003cli\u003eEnhanced grip compared to standard stock tires\u003c\/li\u003e\n  \u003cli\u003eHigh-quality construction for a longer lifespan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56831923683593,"sku":"9253","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/NEUMATICO-100_55-65-XUANCHENG-1_2608ea7c-9ca1-4e51-8209-6a8ff5945c49.webp?v=1763555815"},{"product_id":"cestna-tubeless-pnevmatika-xuancheng-100-55-6-5-11-za-dualtron-storm","title":"XUANCHENG 100\/55-6.5 TUBELESS Tire","description":"\u003ch2\u003eXUANCHENG 100\/55-6.5 TUBELESS Tire\u003c\/h2\u003e\n\u003cp\u003eUpgrade your electric scooter with the XUANCHENG 100\/55-6.5 TUBELESS tire. Designed for high-performance models and suitable for 11-inch wheels, this premium tire delivers exceptional performance and reliability.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e11-inch tubeless design for fewer punctures and easier maintenance\u003c\/li\u003e\n  \u003cli\u003ePMT-based tread pattern for superior grip\u003c\/li\u003e\n  \u003cli\u003eEnhanced grip compared to standard stock tires\u003c\/li\u003e\n  \u003cli\u003eHigh-quality construction for a longer lifespan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56831925125385,"sku":"9253","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/NEUMATICO-100_55-65-XUANCHENG-1_2608ea7c-9ca1-4e51-8209-6a8ff5945c49.webp?v=1763555815"},{"product_id":"cestna-tubeless-pnevmatika-xuancheng-100-55-6-5-11-za-dualtron-achilleus","title":"XUANCHENG 100\/55-6.5 TUBELESS Tire","description":"\u003ch2\u003eXUANCHENG 100\/55-6.5 TUBELESS Tire\u003c\/h2\u003e\n\u003cp\u003eUpgrade your electric scooter with the XUANCHENG 100\/55-6.5 TUBELESS tire. Designed for high-performance models and suitable for 11-inch wheels, this premium tire delivers exceptional performance and reliability.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e11-inch tubeless design for fewer punctures and easier maintenance\u003c\/li\u003e\n  \u003cli\u003ePMT-based tread pattern for superior grip\u003c\/li\u003e\n  \u003cli\u003eEnhanced grip compared to standard stock tires\u003c\/li\u003e\n  \u003cli\u003eHigh-quality construction for a longer lifespan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56831926567177,"sku":"9253","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/NEUMATICO-100_55-65-XUANCHENG-1_2608ea7c-9ca1-4e51-8209-6a8ff5945c49.webp?v=1763555815"},{"product_id":"notranja-zracnica-cst-90-60-6-5-za-dualtron-thunder","title":"Inner tube CST 90\/60-6.5 for DUALTRON Thunder","description":"\u003ch2\u003eHigh-Quality CST Inner Tube for Electric Scooters\u003c\/h2\u003e \u003cp\u003eChoosing a reliable, high-quality inner tube is crucial to prevent punctures or air loss on your electric scooter.\u003c\/p\u003e \u003cp\u003eAt the eVolt service network, we have tested numerous inner tube brands and selected only those that perform best on high-performance scooters, as they are made from premium rubber and valve materials.\u003c\/p\u003e \u003cp\u003eBased on our experience and customer feedback, \u003cstrong\u003eCST inner tubes\u003c\/strong\u003e have proven to be the most durable and high-quality choice.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe 90\/60-6.5 inner tubes are compatible with 90\/60-6.5, 100\/60-6.5, and 110\/60-6.5 tires.\u003c\/strong\u003e\u003c\/p\u003e \u003ch3\u003ePreventing a Flat Tire\u003c\/h3\u003e \u003cp\u003eThe most common cause of flat tires is riding with incorrect pressure in the inner tube. Most electric scooters require at least 3.5 bar, which should be checked regularly with a pressure gauge – ideally once a week.\u003c\/p\u003e \u003cp\u003eUsing incorrect inner tube pressure can lead to:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage and punctures to the inner tube\u003c\/li\u003e \u003cli\u003eTire wear from the inside and outside\u003c\/li\u003e \u003cli\u003ePoor grip and an increased risk of slipping\u003c\/li\u003e \u003cli\u003eLonger braking distances\u003c\/li\u003e \u003cli\u003eWorse handling characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe valves on scooter inner tubes can be difficult to access, which is why we offer a \u003cstrong\u003evalve extender\u003c\/strong\u003e that makes inflation much easier.\u003c\/p\u003e \u003ch3\u003eService Information\u003c\/h3\u003e \u003cp\u003eImproper installation of the inner tube can cause problems such as:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage to the motor cable\u003c\/li\u003e \u003cli\u003eDamage to the motor frame\u003c\/li\u003e \u003cli\u003eSharp cuts on the rim\u003c\/li\u003e \u003cli\u003eDamage to both the tire and the new inner tube\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhen replacing a punctured inner tube, always check the condition of the outer tire. A tire damaged by incorrect pressure will quickly destroy the new inner tube.\u003c\/p\u003e \u003cp\u003eFor a proper, professional inner tube replacement and inspection, visit the nearest eVolt service center in our network.\u003c\/p\u003e \u003ch3\u003eShare Your Experience\u003c\/h3\u003e \u003cp\u003eIf you are satisfied with your purchase and our service, please take a moment to leave a review and help other e-scooter users make the right choice.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56832011960585,"sku":"5041","price":19.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/zracnica-cst-11_dded27b6-659b-4cbf-b5fb-6fef769eb7aa.jpg?v=1763555730"},{"product_id":"notranja-zracnica-cst-90-60-6-5-za-dualtron-thunder-2","title":"Inner tube CST 90\/60-6.5 for DUALTRON Thunder 2","description":"\u003ch2\u003eHigh-Quality CST Inner Tube for Electric Scooters\u003c\/h2\u003e \u003cp\u003eChoosing a reliable, high-quality inner tube is crucial to prevent punctures or air loss on your electric scooter.\u003c\/p\u003e \u003cp\u003eAt the eVolt service network, we have tested numerous inner tube brands and selected only those that perform best on high-performance scooters, as they are made from premium rubber and valve materials.\u003c\/p\u003e \u003cp\u003eBased on our experience and customer feedback, \u003cstrong\u003eCST inner tubes\u003c\/strong\u003e have proven to be the most durable and high-quality choice.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe 90\/60-6.5 inner tubes are compatible with 90\/60-6.5, 100\/60-6.5, and 110\/60-6.5 tires.\u003c\/strong\u003e\u003c\/p\u003e \u003ch3\u003ePreventing a Flat Tire\u003c\/h3\u003e \u003cp\u003eThe most common cause of flat tires is riding with incorrect pressure in the inner tube. Most electric scooters require at least 3.5 bar, which should be checked regularly with a pressure gauge – ideally once a week.\u003c\/p\u003e \u003cp\u003eUsing incorrect inner tube pressure can lead to:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage and punctures to the inner tube\u003c\/li\u003e \u003cli\u003eTire wear from the inside and outside\u003c\/li\u003e \u003cli\u003ePoor grip and an increased risk of slipping\u003c\/li\u003e \u003cli\u003eLonger braking distances\u003c\/li\u003e \u003cli\u003eWorse handling characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe valves on scooter inner tubes can be difficult to access, which is why we offer a \u003cstrong\u003evalve extender\u003c\/strong\u003e that makes inflation much easier.\u003c\/p\u003e \u003ch3\u003eService Information\u003c\/h3\u003e \u003cp\u003eImproper installation of the inner tube can cause problems such as:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage to the motor cable\u003c\/li\u003e \u003cli\u003eDamage to the motor frame\u003c\/li\u003e \u003cli\u003eSharp cuts on the rim\u003c\/li\u003e \u003cli\u003eDamage to both the tire and the new inner tube\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhen replacing a punctured inner tube, always check the condition of the outer tire. A tire damaged by incorrect pressure will quickly destroy the new inner tube.\u003c\/p\u003e \u003cp\u003eFor a proper, professional inner tube replacement and inspection, visit the nearest eVolt service center in our network.\u003c\/p\u003e \u003ch3\u003eShare Your Experience\u003c\/h3\u003e \u003cp\u003eIf you are satisfied with your purchase and our service, please take a moment to leave a review and help other e-scooter users make the right choice.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56832012779785,"sku":"5041","price":19.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/zracnica-cst-11_dded27b6-659b-4cbf-b5fb-6fef769eb7aa.jpg?v=1763555730"},{"product_id":"notranja-zracnica-cst-90-60-6-5-za-dualtron-storm","title":"Inner tube CST 90\/60-6.5 for DUALTRON Storm","description":"\u003ch2\u003eHigh-Quality CST Inner Tube for Electric Scooters\u003c\/h2\u003e \u003cp\u003eChoosing a reliable, high-quality inner tube is crucial to prevent punctures or air loss on your electric scooter.\u003c\/p\u003e \u003cp\u003eAt the eVolt service network, we have tested numerous inner tube brands and selected only those that perform best on high-performance scooters, as they are made from premium rubber and valve materials.\u003c\/p\u003e \u003cp\u003eBased on our experience and customer feedback, \u003cstrong\u003eCST inner tubes\u003c\/strong\u003e have proven to be the most durable and high-quality choice.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe 90\/60-6.5 inner tubes are compatible with 90\/60-6.5, 100\/60-6.5, and 110\/60-6.5 tires.\u003c\/strong\u003e\u003c\/p\u003e \u003ch3\u003ePreventing a Flat Tire\u003c\/h3\u003e \u003cp\u003eThe most common cause of flat tires is riding with incorrect pressure in the inner tube. Most electric scooters require at least 3.5 bar, which should be checked regularly with a pressure gauge – ideally once a week.\u003c\/p\u003e \u003cp\u003eUsing incorrect inner tube pressure can lead to:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage and punctures to the inner tube\u003c\/li\u003e \u003cli\u003eTire wear from the inside and outside\u003c\/li\u003e \u003cli\u003ePoor grip and an increased risk of slipping\u003c\/li\u003e \u003cli\u003eLonger braking distances\u003c\/li\u003e \u003cli\u003eWorse handling characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe valves on scooter inner tubes can be difficult to access, which is why we offer a \u003cstrong\u003evalve extender\u003c\/strong\u003e that makes inflation much easier.\u003c\/p\u003e \u003ch3\u003eService Information\u003c\/h3\u003e \u003cp\u003eImproper installation of the inner tube can cause problems such as:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage to the motor cable\u003c\/li\u003e \u003cli\u003eDamage to the motor frame\u003c\/li\u003e \u003cli\u003eSharp cuts on the rim\u003c\/li\u003e \u003cli\u003eDamage to both the tire and the new inner tube\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhen replacing a punctured inner tube, always check the condition of the outer tire. A tire damaged by incorrect pressure will quickly destroy the new inner tube.\u003c\/p\u003e \u003cp\u003eFor a proper, professional inner tube replacement and inspection, visit the nearest eVolt service center in our network.\u003c\/p\u003e \u003ch3\u003eShare Your Experience\u003c\/h3\u003e \u003cp\u003eIf you are satisfied with your purchase and our service, please take a moment to leave a review and help other e-scooter users make the right choice.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56832014811401,"sku":"5041","price":19.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/zracnica-cst-11_dded27b6-659b-4cbf-b5fb-6fef769eb7aa.jpg?v=1763555730"},{"product_id":"notranja-zracnica-cst-90-60-6-5-za-dualtron-storm-limited","title":"Inner tube CST 90\/60-6.5 for DUALTRON Storm Limited","description":"\u003ch2\u003eHigh-Quality CST Inner Tube for Electric Scooters\u003c\/h2\u003e \u003cp\u003eChoosing a reliable, high-quality inner tube is crucial to prevent punctures or air loss on your electric scooter.\u003c\/p\u003e \u003cp\u003eAt the eVolt service network, we have tested numerous inner tube brands and selected only those that perform best on high-performance scooters, as they are made from premium rubber and valve materials.\u003c\/p\u003e \u003cp\u003eBased on our experience and customer feedback, \u003cstrong\u003eCST inner tubes\u003c\/strong\u003e have proven to be the most durable and high-quality choice.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe 90\/60-6.5 inner tubes are compatible with 90\/60-6.5, 100\/60-6.5, and 110\/60-6.5 tires.\u003c\/strong\u003e\u003c\/p\u003e \u003ch3\u003ePreventing a Flat Tire\u003c\/h3\u003e \u003cp\u003eThe most common cause of flat tires is riding with incorrect pressure in the inner tube. Most electric scooters require at least 3.5 bar, which should be checked regularly with a pressure gauge – ideally once a week.\u003c\/p\u003e \u003cp\u003eUsing incorrect inner tube pressure can lead to:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage and punctures to the inner tube\u003c\/li\u003e \u003cli\u003eTire wear from the inside and outside\u003c\/li\u003e \u003cli\u003ePoor grip and an increased risk of slipping\u003c\/li\u003e \u003cli\u003eLonger braking distances\u003c\/li\u003e \u003cli\u003eWorse handling characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe valves on scooter inner tubes can be difficult to access, which is why we offer a \u003cstrong\u003evalve extender\u003c\/strong\u003e that makes inflation much easier.\u003c\/p\u003e \u003ch3\u003eService Information\u003c\/h3\u003e \u003cp\u003eImproper installation of the inner tube can cause problems such as:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage to the motor cable\u003c\/li\u003e \u003cli\u003eDamage to the motor frame\u003c\/li\u003e \u003cli\u003eSharp cuts on the rim\u003c\/li\u003e \u003cli\u003eDamage to both the tire and the new inner tube\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhen replacing a punctured inner tube, always check the condition of the outer tire. A tire damaged by incorrect pressure will quickly destroy the new inner tube.\u003c\/p\u003e \u003cp\u003eFor a proper, professional inner tube replacement and inspection, visit the nearest eVolt service center in our network.\u003c\/p\u003e \u003ch3\u003eShare Your Experience\u003c\/h3\u003e \u003cp\u003eIf you are satisfied with your purchase and our service, please take a moment to leave a review and help other e-scooter users make the right choice.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56832016089353,"sku":"5041","price":19.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/zracnica-cst-11_dded27b6-659b-4cbf-b5fb-6fef769eb7aa.jpg?v=1763555730"},{"product_id":"notranja-zracnica-cst-90-60-6-5-za-dualtron-achilleus","title":"Inner tube CST 90\/60-6.5 for DUALTRON Achilleus","description":"\u003ch2\u003eHigh-Quality CST Inner Tube for Electric Scooters\u003c\/h2\u003e \u003cp\u003eChoosing a reliable, high-quality inner tube is crucial to prevent punctures or air loss on your electric scooter.\u003c\/p\u003e \u003cp\u003eAt the eVolt service network, we have tested numerous inner tube brands and selected only those that perform best on high-performance scooters, as they are made from premium rubber and valve materials.\u003c\/p\u003e \u003cp\u003eBased on our experience and customer feedback, \u003cstrong\u003eCST inner tubes\u003c\/strong\u003e have proven to be the most durable and high-quality choice.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe 90\/60-6.5 inner tubes are compatible with 90\/60-6.5, 100\/60-6.5, and 110\/60-6.5 tires.\u003c\/strong\u003e\u003c\/p\u003e \u003ch3\u003ePreventing a Flat Tire\u003c\/h3\u003e \u003cp\u003eThe most common cause of flat tires is riding with incorrect pressure in the inner tube. Most electric scooters require at least 3.5 bar, which should be checked regularly with a pressure gauge – ideally once a week.\u003c\/p\u003e \u003cp\u003eUsing incorrect inner tube pressure can lead to:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage and punctures to the inner tube\u003c\/li\u003e \u003cli\u003eTire wear from the inside and outside\u003c\/li\u003e \u003cli\u003ePoor grip and an increased risk of slipping\u003c\/li\u003e \u003cli\u003eLonger braking distances\u003c\/li\u003e \u003cli\u003eWorse handling characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe valves on scooter inner tubes can be difficult to access, which is why we offer a \u003cstrong\u003evalve extender\u003c\/strong\u003e that makes inflation much easier.\u003c\/p\u003e \u003ch3\u003eService Information\u003c\/h3\u003e \u003cp\u003eImproper installation of the inner tube can cause problems such as:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage to the motor cable\u003c\/li\u003e \u003cli\u003eDamage to the motor frame\u003c\/li\u003e \u003cli\u003eSharp cuts on the rim\u003c\/li\u003e \u003cli\u003eDamage to both the tire and the new inner tube\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhen replacing a punctured inner tube, always check the condition of the outer tire. A tire damaged by incorrect pressure will quickly destroy the new inner tube.\u003c\/p\u003e \u003cp\u003eFor a proper, professional inner tube replacement and inspection, visit the nearest eVolt service center in our network.\u003c\/p\u003e \u003ch3\u003eShare Your Experience\u003c\/h3\u003e \u003cp\u003eIf you are satisfied with your purchase and our service, please take a moment to leave a review and help other e-scooter users make the right choice.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56832021496073,"sku":"5041","price":19.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/zracnica-cst-11_dded27b6-659b-4cbf-b5fb-6fef769eb7aa.jpg?v=1763555730"},{"product_id":"notranja-zracnica-cst-90-60-6-5-za-dualtron-ultra-2","title":"Inner tube CST 90\/60-6.5 for DUALTRON Ultra 2","description":"\u003ch2\u003eHigh-Quality CST Inner Tube for Electric Scooters\u003c\/h2\u003e \u003cp\u003eChoosing a reliable, high-quality inner tube is crucial to prevent punctures or air loss on your electric scooter.\u003c\/p\u003e \u003cp\u003eAt the eVolt service network, we have tested numerous inner tube brands and selected only those that perform best on high-performance scooters, as they are made from premium rubber and valve materials.\u003c\/p\u003e \u003cp\u003eBased on our experience and customer feedback, \u003cstrong\u003eCST inner tubes\u003c\/strong\u003e have proven to be the most durable and high-quality choice.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe 90\/60-6.5 inner tubes are compatible with 90\/60-6.5, 100\/60-6.5, and 110\/60-6.5 tires.\u003c\/strong\u003e\u003c\/p\u003e \u003ch3\u003ePreventing a Flat Tire\u003c\/h3\u003e \u003cp\u003eThe most common cause of flat tires is riding with incorrect pressure in the inner tube. Most electric scooters require at least 3.5 bar, which should be checked regularly with a pressure gauge – ideally once a week.\u003c\/p\u003e \u003cp\u003eUsing incorrect inner tube pressure can lead to:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage and punctures to the inner tube\u003c\/li\u003e \u003cli\u003eTire wear from the inside and outside\u003c\/li\u003e \u003cli\u003ePoor grip and an increased risk of slipping\u003c\/li\u003e \u003cli\u003eLonger braking distances\u003c\/li\u003e \u003cli\u003eWorse handling characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe valves on scooter inner tubes can be difficult to access, which is why we offer a \u003cstrong\u003evalve extender\u003c\/strong\u003e that makes inflation much easier.\u003c\/p\u003e \u003ch3\u003eService Information\u003c\/h3\u003e \u003cp\u003eImproper installation of the inner tube can cause problems such as:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDamage to the motor cable\u003c\/li\u003e \u003cli\u003eDamage to the motor frame\u003c\/li\u003e \u003cli\u003eSharp cuts on the rim\u003c\/li\u003e \u003cli\u003eDamage to both the tire and the new inner tube\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhen replacing a punctured inner tube, always check the condition of the outer tire. A tire damaged by incorrect pressure will quickly destroy the new inner tube.\u003c\/p\u003e \u003cp\u003eFor a proper, professional inner tube replacement and inspection, visit the nearest eVolt service center in our network.\u003c\/p\u003e \u003ch3\u003eShare Your Experience\u003c\/h3\u003e \u003cp\u003eIf you are satisfied with your purchase and our service, please take a moment to leave a review and help other e-scooter users make the right choice.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56832023986441,"sku":"5041","price":19.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/zracnica-cst-11_dded27b6-659b-4cbf-b5fb-6fef769eb7aa.jpg?v=1763555730"},{"product_id":"cestna-pnevmatika-70-65-6-5-za-dualtron-3","title":"Tire 70\/65-6.5","description":"\u003ch2\u003e70\/65-6.5 Electric Scooter Tire\u003c\/h2\u003e\n\u003cp\u003eChoosing a quality and suitable tire is essential for a safe ride and for getting the most out of your e-scooter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis 70\/65-6.5 tire is tubeless and does not require an inner tube.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe package includes \u003cstrong\u003eone tire\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003ePreventing Tire Punctures\u003c\/h3\u003e\n\u003cp\u003eThe most common cause of tire punctures is riding with incorrect tire pressure. Most electric scooters require at least \u003cstrong\u003e3.5 bar\u003c\/strong\u003e, so check the pressure \u003cstrong\u003eweekly\u003c\/strong\u003e with a reliable gauge.\u003c\/p\u003e\n\u003cp\u003eRiding with incorrect pressure can cause:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePunctures and damage to the tire\u003c\/li\u003e\n  \u003cli\u003eExcessive tire wear\u003c\/li\u003e\n  \u003cli\u003ePoorer grip and a higher risk of slipping\u003c\/li\u003e\n  \u003cli\u003eLonger braking distances\u003c\/li\u003e\n  \u003cli\u003eImpaired handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to Replace the Tire\u003c\/h3\u003e\n\u003cp\u003eReplace the tire immediately when you notice poorer handling, reduced grip, vibrations, or visible wear. Under normal use, expect to replace it every \u003cstrong\u003e1,000–2,000 km\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch4\u003eVisible Signs of Wear\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eOuter surface:\u003c\/strong\u003e A flattened profile, scuffs, or holes. Aggressive braking and stunts accelerate wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInner surface:\u003c\/strong\u003e Detachment of the wire structure, often a result of incorrect tire pressure.\u003c\/p\u003e\n\n\u003ch4\u003eAvoiding Installation Problems\u003c\/h4\u003e\n\u003cp\u003eIncorrect tire installation can cause:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDamage to the motor cable or frame\u003c\/li\u003e\n  \u003cli\u003eDamage to the rim\u003c\/li\u003e\n  \u003cli\u003eDamage to the tire or causing a puncture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eAre you satisfied with your purchase and our service?\u003c\/strong\u003e Please take a moment to leave a review and help other riders make the right choice.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"Default Title","offer_id":56832030343433,"sku":"6996","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/pnevmatike-70-65-6.5_7d1292e7-2000-49d0-bfff-60085f72ef2b.jpg?v=1763555726"},{"product_id":"polnilec-za-elektricni-skiro-dualtron-storm","title":"Charger for electric scooter Dualtron Storm","description":"\u003ch2\u003eCharger for Electric Scooter Dualtron Storm\u003c\/h2\u003e\n\u003cp\u003eChoosing a suitable, verified charger is essential for the long-term performance and safety of your electric scooter's battery. In addition to charging, the charger balances individual battery cells, which helps extend the overall battery lifespan.\u003c\/p\u003e\n\u003ch3\u003eKey Selection Criteria\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect connector type\u003c\/li\u003e\n\u003cli\u003eMaximum voltage that matches the battery specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing a charger with a lower maximum voltage than specified will prevent a full charge and proper cell balancing. Conversely, a charger with a higher voltage can damage the battery.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"84V 3-pin","offer_id":56832089817353,"sku":"7716","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/polnilec-original-72v_516f252d-3ecb-4422-a021-4b85fd5f5ac2.jpg?v=1763555715"},{"product_id":"polnilec-za-elektricni-skiro-dualtron-thunder-2","title":"Charger for electric scooter Dualtron Thunder 2","description":"\u003ch2\u003eCharger for electric scooter Dualtron Thunder 2\u003c\/h2\u003e\n\u003cp\u003eChoosing a suitable, verified charger is essential for the long-term performance and safety of your electric scooter's battery. In addition to charging, the charger balances individual battery cells, which helps extend the overall battery life.\u003c\/p\u003e\n\u003ch3\u003eKey selection criteria\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect connector type\u003c\/li\u003e\n\u003cli\u003eMaximum voltage that matches the battery specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing a charger with a lower maximum voltage than specified will prevent full charging and proper cell balancing. Conversely, a charger with a higher voltage can damage the battery.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"84V 3-pin","offer_id":56832089948425,"sku":"7716","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/polnilec-original-72v_516f252d-3ecb-4422-a021-4b85fd5f5ac2.jpg?v=1763555715"},{"product_id":"polnilec-za-elektricni-skiro-dualtron-thunder-3","title":"Charger for electric scooter Dualtron Thunder 3","description":"\u003ch2\u003eCharger for Electric Scooter Dualtron Thunder 3\u003c\/h2\u003e\n\u003cp\u003eChoosing a suitable, verified charger is essential for the long-term performance and safety of your electric scooter's battery. In addition to charging, the charger balances individual battery cells, which helps extend the overall battery lifespan.\u003c\/p\u003e\n\u003ch3\u003eKey selection criteria\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect connector type\u003c\/li\u003e\n\u003cli\u003eMaximum voltage that matches the battery specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing a charger with a lower maximum voltage than specified will prevent full charging and proper cell balancing. Conversely, a charger with a higher voltage can damage the battery.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"84V 3-pin","offer_id":56832090243337,"sku":"7716","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/polnilec-original-72v_516f252d-3ecb-4422-a021-4b85fd5f5ac2.jpg?v=1763555715"},{"product_id":"polnilec-za-elektricni-skiro-dualtron-ultra-2","title":"Charger for electric scooter Dualtron Ultra 2","description":"\u003ch2\u003eCharger for Electric Scooter Dualtron Ultra 2\u003c\/h2\u003e\n\u003cp\u003eChoosing a suitable, verified charger is essential for the long-term performance and safety of your electric scooter's battery. In addition to charging, the charger balances individual battery cells, which helps extend the overall battery life.\u003c\/p\u003e\n\u003ch3\u003eKey selection criteria\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect connector type\u003c\/li\u003e\n\u003cli\u003eMaximum voltage that matches the battery specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing a charger with a lower maximum voltage than specified will prevent a full charge and proper cell balancing. Conversely, a charger with a higher voltage can damage the battery.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"84V 3-pin","offer_id":56832090439945,"sku":"7716","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/polnilec-original-72v_516f252d-3ecb-4422-a021-4b85fd5f5ac2.jpg?v=1763555715"},{"product_id":"polnilec-za-elektricni-skiro-dualtron-x-2","title":"Charger for electric scooter Dualtron X 2","description":"\u003ch2\u003eCharger for electric scooter Dualtron X 2\u003c\/h2\u003e\n\u003cp\u003eChoosing a suitable, verified charger is essential for the long-term performance and safety of your electric scooter's battery. In addition to charging, the charger balances individual battery cells, which helps extend the overall battery life.\u003c\/p\u003e\n\u003ch3\u003eKey criteria for selection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect connector type\u003c\/li\u003e\n\u003cli\u003eMaximum voltage that matches the battery specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing a charger with a lower maximum voltage than specified will prevent a full charge and proper cell balancing. Conversely, a charger with a higher voltage can damage the battery.\u003c\/p\u003e","brand":"EKO DRIVE","offers":[{"title":"84V 3-pin","offer_id":56832090767625,"sku":"7716","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/polnilec-original-72v_516f252d-3ecb-4422-a021-4b85fd5f5ac2.jpg?v=1763555715"},{"product_id":"ojacana-zracnica-10x2-5-z-90-ventilom-za-elektricni-skiro-dualtron-victor","title":"Reinforced 10 × 2.5 inner tube with 90° valve for Dualtron Victor electric scooter","description":"\u003ch2\u003eULIP reinforced inner tube with a bent valve\u003c\/h2\u003e\u003cp\u003eThe ULIP 10 × 2.5 inner tube features a reinforced design and a metal valve with a 90-degree bend. It is intended for a suitable ten-inch wheel assembly that uses an inner tube.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Victor.\u003c\/li\u003e\n\u003cli\u003eReinforced ULIP inner tube 10 × 2.5; 90° bent valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter tube diameter: 235 mm.\u003c\/li\u003e\n\u003cli\u003eInner tube diameter: 148 mm.\u003c\/li\u003e\n\u003cli\u003eTube width: 43 mm.\u003c\/li\u003e\n\u003cli\u003eBent valve: 35 mm length, 90° angle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn addition to the tire size, check the valve orientation and access near the motor. The valve should protrude from the rim opening without tension, with enough room to attach a pump.\u003c\/p\u003e\u003ch3\u003eReplacement without pinching the tube\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBefore replacing, find the cause of the puncture in the tire or on the rim. A foreign object, sharp edge, or damaged rim strip can damage the new inner tube immediately.\u003c\/li\u003e\n\u003cli\u003eInflate the inner tube slightly, align the valve with the opening, and distribute it evenly inside the tire. When installing the bead, do not pinch it with installation tools.\u003c\/li\u003e\n\u003cli\u003eFill to the pressure allowed for the wheel assembly. Check the valve position and sealing; do not use the valve cap to stop leaks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832137265417,"sku":"ULP240.23","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39eb4ebe7487402ab5e781dd98bdc302_1981e468-f693-4414-a81b-a2cda572480a.jpg?v=1771524743"},{"product_id":"ojacana-zracnica-10x2-5-z-90-ventilom-za-elektricni-skiro-dualtron-victor-luxury","title":"Reinforced 10 × 2.5 inner tube with 90° valve for Dualtron Victor Luxury electric scooter","description":"\u003ch2\u003eULIP Reinforced Inner Tube with Bent Valve\u003c\/h2\u003e\u003cp\u003eThe ULIP 10 × 2.5 inner tube features a reinforced design and a metal valve with a 90-degree bend. It is designed for the appropriate ten-inch wheel assembly that uses an inner tube.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Victor Luxury.\u003c\/li\u003e\n\u003cli\u003eReinforced ULIP 10 × 2.5 inner tube; 90° bent valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter of inner tube: 235 mm.\u003c\/li\u003e\n\u003cli\u003eInner diameter of inner tube: 148 mm.\u003c\/li\u003e\n\u003cli\u003eInner tube width: 43 mm.\u003c\/li\u003e\n\u003cli\u003eBent valve: length 35 mm, angle 90°.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn addition to the tire dimension, check the valve direction and accessibility near the motor. The valve should emerge from the rim hole without tension, with enough space to connect a pump.\u003c\/p\u003e\u003ch3\u003eReplacement without pinching the inner tube\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBefore replacing, look for the cause of the puncture in the tire or on the rim. A foreign object, sharp edge, or damaged rim strip can damage the new inner tube immediately.\u003c\/li\u003e\n\u003cli\u003eInflate the inner tube slightly, align the valve with the hole, and distribute it evenly inside the tire. When installing the bead, do not pinch it with mounting tools.\u003c\/li\u003e\n\u003cli\u003eFill to the pressure allowed for the wheel assembly. Check the valve position and seal; do not use the valve cap to stop a leak.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832137363721,"sku":"ULP240.23","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39eb4ebe7487402ab5e781dd98bdc302_566ba69b-1bfc-46a7-96d5-15ae1849551f.jpg?v=1771524745"},{"product_id":"ojacana-zracnica-10x2-5-z-90-ventilom-za-elektricni-skiro-dualtron-spider","title":"Reinforced 10 × 2.5 inner tube with 90° valve for Dualtron Spider electric scooter","description":"\u003ch2\u003eReinforced ULIP inner tube with angled valve\u003c\/h2\u003e\u003cp\u003eThe ULIP 10 × 2.5 inner tube features a reinforced design and a 90-degree bent metal valve. It is intended for compatible ten-inch wheel assemblies with inner tubes.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Spider.\u003c\/li\u003e\n\u003cli\u003eReinforced ULIP inner tube 10 × 2.5; 90° angled valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter of inner tube: 235 mm.\u003c\/li\u003e\n\u003cli\u003eInner diameter of inner tube: 148 mm.\u003c\/li\u003e\n\u003cli\u003eWidth of inner tube: 43 mm.\u003c\/li\u003e\n\u003cli\u003eAngled valve: 35 mm length, 90° angle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn addition to the tire size, check the valve direction and accessibility near the motor. The valve should protrude from the rim hole without tension, with enough room to attach a pump.\u003c\/p\u003e\u003ch3\u003eReplacement without pinching the inner tube\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBefore replacement, look for the cause of the puncture in the tire or on the rim. Foreign objects, sharp edges, or damaged rim tape can immediately damage the new inner tube as well.\u003c\/li\u003e\n\u003cli\u003eInflate the inner tube slightly, align the valve with the hole, and distribute it evenly in the tire. Do not squeeze it with mounting tools when installing the bead.\u003c\/li\u003e\n\u003cli\u003eInflate to the pressure allowed for the wheel assembly. Check the valve position and sealing; do not use the valve cap to stop leaks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832137396489,"sku":"ULP240.23","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39eb4ebe7487402ab5e781dd98bdc302_26f72d63-6e66-46f5-b40d-e4cb3147509c.jpg?v=1771524747"},{"product_id":"ojacana-zracnica-10x2-5-z-90-ventilom-za-elektricni-skiro-dualtron-spider-2","title":"Reinforced inner tube 10 × 2.5 with 90° valve for Dualtron Spider 2 electric scooter","description":"\u003ch2\u003eULIP reinforced inner tube with angled valve\u003c\/h2\u003e\u003cp\u003eThe ULIP 10 × 2.5 inner tube features a reinforced design and a metal valve with a 90-degree bend. It is intended for a compatible ten-inch wheel assembly using an inner tube.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Spider 2.\u003c\/li\u003e\n\u003cli\u003eULIP 10 × 2.5 reinforced inner tube; angled 90° valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter of inner tube: 235 mm.\u003c\/li\u003e\n\u003cli\u003eInner diameter of inner tube: 148 mm.\u003c\/li\u003e\n\u003cli\u003eWidth of inner tube: 43 mm.\u003c\/li\u003e\n\u003cli\u003eAngled valve: length 35 mm, angle 90°.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn addition to the tire dimension, check the valve direction and access to it near the motor. The valve should emerge from the rim opening without tension, with enough space to attach the pump.\u003c\/p\u003e\u003ch3\u003eReplacement without pinching the inner tube\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBefore replacing, find the cause of the puncture in the tire or on the rim. Debris, a sharp edge, or a damaged rim strip can immediately damage the new inner tube as well.\u003c\/li\u003e\n\u003cli\u003eInflate the inner tube slightly, align the valve with the opening, and distribute it evenly in the tire. Do not pinch it with mounting tools when seating the bead.\u003c\/li\u003e\n\u003cli\u003eInflate to the pressure allowed for the wheel assembly. Check the valve position and sealing; do not use the valve cap to stop leaks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832137494793,"sku":"ULP240.23","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39eb4ebe7487402ab5e781dd98bdc302_448a7a5c-bbc5-40ad-9ff7-5b728a8a7017.jpg?v=1771524749"},{"product_id":"ojacana-zracnica-ulip-10-x-2-5-z-90-ventilom","title":"Reinforced inner tube ULIP 10 × 2.5 with 90° valve","description":"\u003ch2\u003eReinforced ULIP inner tube with curved valve\u003c\/h2\u003e\u003cp\u003eThe ULIP 10 × 2.5 inner tube has a reinforced design and a metal valve with a 90-degree bend. It is intended for a corresponding ten-inch wheel assembly with an inner tube.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eReinforced ULIP inner tube 10 × 2.5; curved valve 90°.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter of inner tube: 235 mm.\u003c\/li\u003e\n\u003cli\u003eInner diameter of inner tube: 148 mm.\u003c\/li\u003e\n\u003cli\u003eWidth of inner tube: 43 mm.\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 136 g.\u003c\/li\u003e\n\u003cli\u003eCurved valve: length 35 mm, angle 90°.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn addition to the tire dimension, check the direction of the valve and access to it by the motor. The valve should emerge from the rim hole without tension, with enough space to attach the pump.\u003c\/p\u003e\u003ch3\u003eReplacement without pinching the inner tube\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBefore replacement, find the cause of the puncture in the tire or on the rim. A foreign object, sharp edge, or damaged rim tape can immediately damage the new inner tube as well.\u003c\/li\u003e\n\u003cli\u003eInflate the inner tube slightly, align the valve with the hole, and distribute it evenly in the tire. When installing the bead, do not pinch it with mounting tools.\u003c\/li\u003e\n\u003cli\u003eInflate to the pressure allowed for the wheel assembly. Check the position of the valve and sealing; do not use the valve cap to stop leaks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832137527561,"sku":"ULP240.23","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39eb4ebe7487402ab5e781dd98bdc302_08882a9b-c523-4543-9d27-36893560e387.jpg?v=1771524751"},{"product_id":"ojacana-zracnica-10x2-5-z-90-ventilom-za-elektricni-skiro-dualtron-3","title":"Reinforced 10 × 2.5 inner tube with 90° valve for Dualtron 3 electric scooter","description":"\u003ch2\u003eReinforced ULIP inner tube with angled valve\u003c\/h2\u003e\u003cp\u003eThe ULIP 10 × 2.5 inner tube has a reinforced design and a metal valve with a 90-degree bend. It is designed for a compatible ten-inch wheel assembly with an inner tube.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e \u003cli\u003eModel: Dualtron 3.\u003c\/li\u003e \u003cli\u003eReinforced ULIP 10 × 2.5 inner tube; angled 90° valve.\u003c\/li\u003e \u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e \u003cli\u003eOuter diameter of inner tube: 235 mm.\u003c\/li\u003e \u003cli\u003eInner diameter of inner tube: 148 mm.\u003c\/li\u003e \u003cli\u003eWidth of inner tube: 43 mm.\u003c\/li\u003e \u003cli\u003eAngled valve: 35 mm length, 90° angle.\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003eIn addition to the tire size, check the direction of the valve and access to it by the motor. The valve should emerge from the rim opening without tension, with enough space to connect a pump.\u003c\/p\u003e\u003ch3\u003eReplacement without pinching the inner tube\u003c\/h3\u003e\u003cul\u003e \u003cli\u003eBefore replacement, identify the cause of the puncture in the tire or rim. A foreign object, sharp edge, or damaged rim tape can immediately damage the new inner tube as well.\u003c\/li\u003e \u003cli\u003eInflate the inner tube slightly, align the valve with the opening, and distribute it evenly in the tire. When installing the bead, do not pinch it with mounting tools.\u003c\/li\u003e \u003cli\u003eInflate to the pressure allowed for the wheel assembly. Check the position of the valve and sealing; do not use valve caps to stop a leak.\u003c\/li\u003e \u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832137560329,"sku":"ULP240.23","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39eb4ebe7487402ab5e781dd98bdc302_4ebfae7f-d7fe-429b-931a-87886bc2fd6f.jpg?v=1771524753"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-thunder","title":"NUTT semi-metallic brake pads for Dualtron Thunder","description":"\u003ch2\u003eSemi-metallic pads for a suitable NUTT caliper\u003c\/h2\u003e\u003cp\u003eTwo black brackets with side tabs and a rectangular friction surface make up a pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and safety pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Thunder.\u003c\/li\u003e\n\u003cli\u003eBrake compound: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a pad width of approximately 30 mm and height of 17 mm.\u003c\/li\u003e\n\u003cli\u003ePair with spring and cotter pin; shape for a suitable NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm measurement refers to the friction surface, not the overall outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially on vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUsage applies only to the installed NUTT caliper with the corresponding pad shape and mounting.\u003c\/p\u003e\u003ch3\u003eBrake compound\u003c\/h3\u003e\u003cp\u003eThe semi-metallic compound combines metal particles and a resin binder. The blend represents a compromise between initial bite and resistance to thermal stress. For even braking, a clean disc and a gradual bedding-in of the new pair are important.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect pads for poor braking performance, uneven wear, or contamination. Replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the safety pin and the old pair. After the procedure for your specific caliper, prepare space for the new pads, then insert the spring, new pair, and safety pin. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck the free rotation of the wheel and the operation of the lever. Bed in the new pads with several gradual decelerations in a safe area, without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138543369,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_0684fadd-2943-4889-ac9f-de48d2f1674e.jpg?v=1771524823"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-thunder-2","title":"NUTT semi-metallic brake pads for Dualtron Thunder 2","description":"\u003ch2\u003eSemi-metallic pads for compatible NUTT caliper\u003c\/h2\u003e\u003cp\u003eTwo black brackets with side lugs and a rectangular friction surface make up a pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and safety pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Thunder 2.\u003c\/li\u003e\n\u003cli\u003eBrake pad: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a lining width of approximately 30 mm and height of 17 mm.\u003c\/li\u003e\n\u003cli\u003ePair with spring and cotter pin; shape for compatible NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm figure refers to the friction surface, not the entire outline. Before replacing, check the installed caliper and the position of the mounting lugs, especially for vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUse applies only to the installed NUTT caliper with the corresponding pad shape and mounting.\u003c\/p\u003e\u003ch3\u003eBrake pad composition\u003c\/h3\u003e\u003cp\u003eThe semi-metallic pad combines metallic particles and a resin binder. The compound represents a compromise between initial bite and resistance to thermal stress. A clean disc and gradual bedding-in of the new pair are important for even braking.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect pads in case of poor braking, uneven wear, or contamination. Replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the safety pin and the old pair. Prepare the space for new pads according to the procedure for your caliper, then insert the spring, the new pair, and the safety pin. Do not grease friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck for free wheel rotation and lever operation. Bed in the new pads with several gradual decelerations in a safe area, without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138608905,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_c3a7e540-88e8-49ea-8a80-178cc2f3e575.jpg?v=1771524825"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-storm","title":"Semi-metallic NUTT brake pads for Dualtron Storm","description":"\u003ch2\u003eSemi-metallic pads for compatible NUTT caliper\u003c\/h2\u003e\u003cp\u003eTwo black brackets with side lugs and a rectangular friction surface make up this pair of semi-metallic brake pads. The friction area measures approximately 30 × 17 mm; a spring and retaining pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Storm.\u003c\/li\u003e\n\u003cli\u003eBrake pad: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a lining width of approximately 30 mm and height of 17 mm.\u003c\/li\u003e\n\u003cli\u003ePair with spring and cotter pin; shape for compatible NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm specification refers to the friction surface, not the entire outline. Before replacing, check the installed caliper and the position of the mounting lugs, especially for vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUse applies only to the installed NUTT caliper with the correct shape and pad mounting.\u003c\/p\u003e\u003ch3\u003eBrake pad compound\u003c\/h3\u003e\u003cp\u003eThe semi-metallic compound combines metal particles and a resin binder. The mixture represents a compromise between initial grip and resistance to thermal load. A clean disc and gradual bedding-in of the new pair are important for even braking.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect the pads if there is poor braking, uneven wear, or contamination. Replace both pads in the same caliper; check the minimum allowable thickness in the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the retaining pin and old pair. Following the procedure for your caliper, prepare space for the new pads, then insert the spring, the new pair, and the retaining pin. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck for free wheel rotation and lever operation. Bed in the new pads with several gradual stops in a safe area, without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138674441,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_bbf9f65e-e1c6-4da5-ba4d-6590e0230fa7.jpg?v=1771524828"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-storm-ltd","title":"Full-metal NUTT brake pads for Dualtron Storm Limited","description":"\u003ch2\u003eSemi-metallic pads for compatible NUTT caliper\u003c\/h2\u003e\u003cp\u003eBlack backing plates with side tabs and a rectangular friction surface make up a pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and locking pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Storm Limited.\u003c\/li\u003e\n\u003cli\u003eBrake compound: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a friction area approximately 30 mm wide and 17 mm high.\u003c\/li\u003e\n\u003cli\u003ePair with spring and cotter pin; shape for compatible NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm figure refers to the friction surface, not the overall outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially on vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUse applies only to the installed NUTT caliper with the corresponding shape and pad mounting.\u003c\/p\u003e\u003ch3\u003eBrake compound\u003c\/h3\u003e\u003cp\u003eThe semi-metallic compound combines metal particles and resin binder. The mixture is a compromise between initial bite and resistance to heat load. For even braking, a clean disc and gradual bedding-in of the new pair are important.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect the pads in case of reduced braking performance, uneven wear, or contamination. Replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the locking pin and the old pair. Prepare the space for the new pads according to the procedure for your caliper, then insert the spring, the new pair, and the locking pin. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck for free rotation of the wheel and lever operation. Bed in the new pads with several gradual stops in a safe area, without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138707209,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_757bc686-3ee3-4994-835c-5761f99399f5.jpg?v=1771524830"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-ultra-2","title":"NUTT semi-metallic brake pads for Dualtron Ultra 2","description":"\u003ch2\u003eSemi-metallic pads for a suitable NUTT caliper\u003c\/h2\u003e\u003cp\u003eTwo black mounts with side tabs and a rectangular friction surface make up a pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and safety clip are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Ultra 2.\u003c\/li\u003e\n\u003cli\u003eBrake compound: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a friction surface approx. 30 mm wide and 17 mm high.\u003c\/li\u003e\n\u003cli\u003ePair with spring and cotter pin; shape for a suitable NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm specification refers to the friction surface, not the overall outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially for vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUse applies only to the installed NUTT caliper with the corresponding pad shape and mounting.\u003c\/p\u003e\u003ch3\u003eBrake compound\u003c\/h3\u003e\u003cp\u003eThe semi-metallic compound combines metal particles with a resin binder. The blend is a compromise between initial bite and heat resistance. A clean disc and gradual bedding-in of the new pair are important for consistent braking.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCheck the pads if braking performance drops, wear is uneven, or they become contaminated. Replace both pads in the same caliper; check your brake manual for the minimum permitted thickness.\u003c\/li\u003e\n\u003cli\u003eRemove the safety clip and the old pair. Prepare the space for the new pads according to the procedure for your specific caliper, then insert the spring, the new pair, and the safety clip. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck for free wheel rotation and lever operation. Bed in the new pads with several gradual decelerations in a safe location, without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138739977,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_6c206aa7-afab-49d1-85de-56ff38980a93.jpg?v=1771524834"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-victor","title":"Semi-metallic brake pads for NUTT for Dualtron Victor","description":"\u003ch2\u003eSemi-metallic pads for a suitable NUTT caliper\u003c\/h2\u003e\u003cp\u003eBlack backing plates with side tabs and a rectangular friction surface make up a pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and retainer are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eModel: Dualtron Victor.\u003c\/li\u003e\u003cli\u003eBrake pad material: semi-metallic.\u003c\/li\u003e\u003cli\u003eBlack pads with a friction surface width of approximately 30 mm and height of 17 mm.\u003c\/li\u003e\u003cli\u003ePair with spring and cotter pin; shape for a suitable NUTT caliper.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm figure refers to the friction surface, not the entire outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially for vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUsage applies only to the installed NUTT caliper with the correct shape and pad mounting.\u003c\/p\u003e\u003ch3\u003eBrake pad material\u003c\/h3\u003e\u003cp\u003eThe semi-metallic compound combines metal particles and a resin binder. The mixture represents a compromise between initial bite and resistance to thermal stress. For even braking, a clean rotor and gradual bedding in of the new pair are important.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eInspect the pads in case of reduced braking performance, uneven wear, or contamination. Replace both pads in the same caliper; check the minimum allowed thickness in your brake manual.\u003c\/li\u003e\u003cli\u003eRemove the retainer and the old pair. Following the procedure for your specific caliper, prepare space for the new pads, then insert the spring, the new pair, and the retainer. Do not grease the friction surfaces.\u003c\/li\u003e\u003cli\u003eCheck wheel rotation and brake lever operation. Bed in the new pads with several gradual decelerations in a safe area, without locking the wheels.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138772745,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_6070bf35-b769-4f42-be7c-a96822b03b02.jpg?v=1771524837"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-achilleus","title":"NUTT semi-metallic brake pads for Dualtron Achilleus","description":"\u003ch2\u003eSemi-metallic pads for corresponding NUTT caliper\u003c\/h2\u003e\u003cp\u003eBlack backplates with side tabs and a rectangular friction surface make up this pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and safety pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Achilleus.\u003c\/li\u003e\n\u003cli\u003eBrake pad material: Semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a friction area approx. 30 mm wide and 17 mm high.\u003c\/li\u003e\n\u003cli\u003ePair with spring and split pin; shaped for the corresponding NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm figure refers to the friction surface, not the overall outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially for vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUse applies only to the installed NUTT caliper with the corresponding shape and pad mount.\u003c\/p\u003e\u003ch3\u003eBrake pad material\u003c\/h3\u003e\u003cp\u003eThe semi-metallic compound combines metal particles and a resin binder. The compound represents a compromise between initial bite and resistance to thermal stress. For even braking, a clean disc and gradual break-in of the new pair are important.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect pads if braking performance decreases, wear is uneven, or they are contaminated. Replace both pads in the same caliper; check the minimum thickness in the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the safety device and the old pair. Prepare the space for new pads according to your caliper's procedure, then insert the spring, the new pair, and the safety device. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck wheel clearance and lever operation. Break in the new pads with several gradual stops in a safe area without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138871049,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_32b13434-2f1e-4511-84e8-e64906aa2d53.jpg?v=1771524839"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-x","title":"NUTT semi-metallic brake pads for Dualtron X","description":"\u003ch2\u003eSemi-metallic pads for compatible NUTT calipers\u003c\/h2\u003e\u003cp\u003eBlack backing plates with side tabs and a rectangular friction surface make up this pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and split pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron X.\u003c\/li\u003e\n\u003cli\u003eBrake lining: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with lining approximately 30 mm wide and 17 mm high.\u003c\/li\u003e\n\u003cli\u003ePair with spring and split pin; shaped for compatible NUTT calipers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm specification refers to the friction surface, not the entire outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially on vehicles with aftermarket brake upgrades.\u003c\/p\u003e\u003cp\u003eOnly compatible with the installed NUTT caliper with the correct shape and pad mounting system.\u003c\/p\u003e\u003ch3\u003eBrake lining\u003c\/h3\u003e\u003cp\u003eSemi-metallic linings combine metal particles and a resin binder. This compound strikes a balance between initial bite and heat resistance. For even braking, a clean disc and proper break-in of the new pair are important.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect the pads if you experience reduced braking performance, uneven wear, or contamination. Replace both pads in the same caliper; check your brake manual for the minimum allowed thickness.\u003c\/li\u003e\n\u003cli\u003eRemove the split pin and the old pair. Prepare space for the new pads according to your caliper's procedure, then insert the spring, the new pair, and the split pin. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck for free wheel movement and lever operation. Bed in the new pads with several gradual decelerations in a safe area, avoiding wheel lock-up.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832138903817,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_5a52d4f5-671a-4402-aa9a-9edcf0c7ac99.jpg?v=1771524841"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-x2","title":"NUTT semi-metallic brake pads for Dualtron X2","description":"\u003ch2\u003eSemi-metallic pads for the corresponding NUTT caliper\u003c\/h2\u003e\u003cp\u003eBlack backing plates with side tabs and rectangular friction surface make up this pair of semi-metallic brake pads. The friction area measures approximately 30 × 17 mm; a spring and locking pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron X2.\u003c\/li\u003e\n\u003cli\u003eBrake pad: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with friction material approximately 30 mm wide and 17 mm high.\u003c\/li\u003e\n\u003cli\u003ePair with spring and cotter pin; shape for matching NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm data refers to the friction surface, not the entire outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially on vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUsage applies only to the installed NUTT caliper with the correct shape and pad mounting.\u003c\/p\u003e\u003ch3\u003eBrake pad material\u003c\/h3\u003e\u003cp\u003eSemi-metallic compound combines metal particles with resin binders. This blend is a compromise between initial bite and thermal resistance. A clean disc and gradual bedding-in of the new pair are important for consistent braking.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect the pads if you notice reduced braking performance, uneven wear, or contamination. Replace both pads in the same caliper; check the minimum allowable thickness in the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the safety pin and the old pair. Following the procedure for your specific caliper, prepare space for the new pads, then insert the spring, the new pair, and the safety pin. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck for free wheel rotation and lever feel. Bed in the new pads with several gradual decelerations in a safe location, without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832139264265,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_6603f649-c3c4-4fc1-8bbe-2077853ab286.jpg?v=1771524844"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-spider-max","title":"Semi-metallic NUTT brake pads for Dualtron Spider Max","description":"\u003ch2\u003eSemi-metallic pads for compatible NUTT caliper\u003c\/h2\u003e\u003cp\u003eBlack holders with side tabs and a rectangular friction surface make up this pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and safety pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Spider Max.\u003c\/li\u003e\n\u003cli\u003eBrake compound: Semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a friction surface width of approximately 30 mm and height of 17 mm.\u003c\/li\u003e\n\u003cli\u003ePair with spring and split pin; shape for compatible NUTT caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm specification refers to the friction surface, not the overall outline. Before replacing, verify the installed caliper and the position of the mounting tabs, especially for vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUsage applies only to the installed NUTT caliper with the correct shape and pad mounting.\u003c\/p\u003e\u003ch3\u003eBrake compound\u003c\/h3\u003e\u003cp\u003eThe semi-metallic compound combines metallic particles and a resin binder. The mixture represents a compromise between initial bite and thermal resistance. For consistent braking, a clean disc and gradual bedding-in of the new pair are important.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect the pads if you notice poor braking performance, uneven wear, or contamination. Always replace both pads in the same caliper; check your brake manual for the minimum allowed thickness.\u003c\/li\u003e\n\u003cli\u003eRemove the safety pin and the old pair. Prepare the space for new pads according to your caliper's procedure, then insert the spring, new pair, and safety pin. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck for free wheel rotation and lever operation. Bed in the new pads by performing several gradual decelerations in a safe area without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832139297033,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_8b9b45ae-0930-437f-a169-b2c75a3887d0.jpg?v=1771524847"},{"product_id":"polkovinske-zavorne-ploscice-za-nutt-zavore-za-dualtron-eagle-pro","title":"NUTT semi-metallic brake pads for Dualtron Eagle Pro","description":"\u003ch2\u003eSemi-metallic pads for compatible NUTT calipers\u003c\/h2\u003e\u003cp\u003eBlack backplates with side ears and a rectangular friction surface make up this pair of semi-metallic brake pads. The friction area measures approximately 30 × 17 mm; a spring and cotter pin are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Eagle Pro.\u003c\/li\u003e\n\u003cli\u003eBrake pad compound: semi-metallic.\u003c\/li\u003e\n\u003cli\u003eBlack pads with a lining width of approx. 30 mm and height of 17 mm.\u003c\/li\u003e\n\u003cli\u003ePair with spring and cotter pin; shape for compatible NUTT calipers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFriction surface: 30 × 17 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 30 × 17 mm figure refers to the friction surface, not the entire outline. Before replacing, check the installed caliper and the position of the mounting ears, especially on vehicles with upgraded brakes.\u003c\/p\u003e\u003cp\u003eUse applies only to installed NUTT calipers with the corresponding shape and pad mounting.\u003c\/p\u003e\u003cp\u003eFor this model, it applies to the Upgrade\/Limited versions with compatible NUTT hydraulic brakes.\u003c\/p\u003e\u003ch3\u003eBrake lining\u003c\/h3\u003e\u003cp\u003eThe semi-metallic lining combines metal particles and a resin binder. The mixture represents a compromise between initial bite and thermal load resistance. A clean disc and gradual breaking-in of the new pair are important for consistent braking.\u003c\/p\u003e\u003ch3\u003eWhen to replace and how to start\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInspect the pads if braking performance decreases, wear is uneven, or they are contaminated. Replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.\u003c\/li\u003e\n\u003cli\u003eRemove the safety clip and the old pair. Prepare space for the new pads according to the procedure for your caliper, then insert the spring, new pair, and safety clip. Do not grease the friction surfaces.\u003c\/li\u003e\n\u003cli\u003eCheck wheel free-spin and lever operation. Break in the new pads with several gradual decelerations in a safe area, without locking the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":56832139329801,"sku":"ULP174.18","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/3c4ada6ae7d3489c803ac40417fea97b_47402f85-681e-486e-9c2f-3171729cabfb.jpg?v=1771524850"},{"product_id":"zavorni-disk-160-mm-za-elektricni-skiro-dualtron-thunder","title":"160 mm Brake Disc for Electric Scooter Dualtron Thunder","description":"\u003ch2\u003e160 mm disc with spacing for a 50 mm bolt circle\u003c\/h2\u003e\u003cp\u003eThe silver 160 mm brake disc has six holes on a 50 mm bolt circle. The wavy outer edge and openings along the braking surface define its distinctive shape.\u003c\/p\u003e\u003ch3\u003eFeatures and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Thunder.\u003c\/li\u003e\n\u003cli\u003eDiameter 160 mm; 6 holes; 50 mm bolt circle diameter.\u003c\/li\u003e\n\u003cli\u003eSix bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDisc diameter: 160 mm.\u003c\/li\u003e\n\u003cli\u003eBolt circle: 50 mm.\u003c\/li\u003e\n\u003cli\u003eSpacing between adjacent holes: 25 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe spacing between adjacent holes is 25 mm. The disc attaches to a compatible six-bolt hub with a 50 mm bolt circle.\u003c\/p\u003e\u003ch3\u003eDisc replacement and alignment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the disc if there are cracks, permanent deformation, or wear below the minimum thickness. If it rubs, check the caliper alignment first.\u003c\/li\u003e\n\u003cli\u003eClean the hub mounting surface and install the disc in the indicated rotation direction. Tighten the bolts gradually in a cross pattern with the prescribed torque.\u003c\/li\u003e\n\u003cli\u003eKeep the braking surface clean and free of grease. After assembly, check for free rotation and braking; new discs and pads require proper bedding-in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199272558857,"sku":"ULP150.10","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-c4504f9113fa-f0da228efd7e4516a8c73928ef34b299.jpg?v=1784119041"},{"product_id":"zavorni-disk-160-mm-za-elektricni-skiro-dualtron-ultra","title":"Disc Brake 160 mm for Electric Scooter Dualtron Ultra","description":"\u003ch2\u003e160 mm disc with 50 mm bolt pattern spacing\u003c\/h2\u003e\u003cp\u003eThe 160 mm silver brake disc features six holes on a 50 mm bolt circle. Its distinctive shape is defined by a wavy outer edge and cutouts along the braking surface.\u003c\/p\u003e\u003ch3\u003eFeatures and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Ultra.\u003c\/li\u003e\n\u003cli\u003e160 mm diameter; 6 holes; 50 mm bolt circle.\u003c\/li\u003e\n\u003cli\u003eSix bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDisc diameter: 160 mm.\u003c\/li\u003e\n\u003cli\u003eBolt circle: 50 mm.\u003c\/li\u003e\n\u003cli\u003eDistance between adjacent holes: 25 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe spacing between adjacent holes is 25 mm. The disc mounts to a compatible six-bolt hub with a 50 mm bolt circle.\u003c\/p\u003e\u003ch3\u003eDisc replacement and alignment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the disc if it shows cracks, permanent deformation, or wear below the minimum thickness. If you hear rubbing, check the caliper alignment as well.\u003c\/li\u003e\n\u003cli\u003eClean the hub mounting surface and install the disc in the marked direction of rotation. Tighten the bolts gradually in a cross pattern to the specified torque.\u003c\/li\u003e\n\u003cli\u003eKeep the braking surface clean and free of grease. After assembly, check for free rotation and braking performance; new discs and pads require proper bedding-in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199272591625,"sku":"ULP150.10","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-c4504f9113fa-f0da228efd7e4516a8c73928ef34b299.jpg?v=1784119041"},{"product_id":"terenska-zunanja-pnevmatika-255x80-80-65-6-za-elektricni-skiro-dualtron-eagle-pro","title":"Off-road outer tire 255 × 80 (80\/65-6) for Dualtron Eagle Pro electric scooter","description":"\u003ch2\u003eOff-road tread in dimension 255 × 80\u003c\/h2\u003e\u003cp\u003eThe black outer tire marked 255 × 80 or 80\/65-6 features large tread blocks on the center and shoulders. The profile is designed for surfaces where a more aggressive off-road pattern is desired.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Eagle Pro.\u003c\/li\u003e\n\u003cli\u003e255 × 80 \/ 80\/65-6; coarse block profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompare the full designation, especially the final number 6, and the width of your existing tire. The tire bead must match the rim, and there must be enough clearance between the blocks and the fender.\u003c\/p\u003e\u003ch3\u003eTire inspection and installation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the tire if the tread is worn, or if there are cracks, bulges, or a damaged bead. Remove debris and check the rim condition before installation.\u003c\/li\u003e\n\u003cli\u003eDeflate the wheel, remove the old tire, and install the new one without damaging the bead. Pay attention to any rotation direction arrows.\u003c\/li\u003e\n\u003cli\u003eSet the pressure according to the allowed values for the wheel and load. Check for even seating and free rotation; recheck the pressure before the next ride.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199276753161,"sku":"ULP3318.00","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-ecd34462beec-40a91d87d7984a659b6765e521108892.jpg?v=1784119040"},{"product_id":"terenska-zunanja-pnevmatika-255x80-80-65-6-za-elektricni-skiro-dualtron-victor","title":"255 × 80 (80\/65-6) off-road outer tire for Dualtron Victor electric scooter","description":"\u003ch2\u003eOff-road tire tread, size 255 × 80\u003c\/h2\u003e\u003cp\u003eThe black outer tire, marked 255 × 80 or 80\/65-6, features large blocks across the center and shoulders. This tread pattern is designed for use on terrain where a more aggressive off-road pattern is desired.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Victor.\u003c\/li\u003e\n\u003cli\u003e255 × 80 \/ 80\/65-6; coarse block tread.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompare the full marking, especially the final digit 6, and the width of your existing tire. The tire bead must fit the rim, and there must be sufficient clearance between the lugs and the mudguard.\u003c\/p\u003e\u003ch3\u003eTire inspection and installation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the tire if the tread is worn, or if there are cracks, bulges, or damage to the bead. Remove any debris and check the condition of the rim before installation.\u003c\/li\u003e\n\u003cli\u003eDeflate the wheel, remove the old tire, and install the new one without damaging the bead. Observe any rotation direction arrow.\u003c\/li\u003e\n\u003cli\u003eSet the pressure according to the allowed values for the wheel and load. Check for uniform seating and free rotation; re-check the pressure before your next ride.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199276785929,"sku":"ULP3318.00","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-ecd34462beec-40a91d87d7984a659b6765e521108892.jpg?v=1784119040"},{"product_id":"samozacelitvena-tubeless-pnevmatika-ulip-100-55-6-5-za-elektricni-skiro-dualtron-thunder-2","title":"Self-sealing tubeless ULIP 100\/55-6.5 tire for Dualtron Thunder 2 electric scooter","description":"\u003ch2\u003eULIP road profile with additional sealing layer\u003c\/h2\u003e\u003cp\u003eThe ULIP 100\/55-6.5 tubeless tire combines a wide road surface with angled grooves and an inner sealing layer. It is installed without a separate inner tube on a suitable rim.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Thunder 2.\u003c\/li\u003e\n\u003cli\u003eULIP 100\/55-6.5; road profile; tubeless with sealing layer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter: 257 mm.\u003c\/li\u003e\n\u003cli\u003eInner diameter: 163 mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 107 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe sealing layer can limit air leakage in case of a small puncture on the tread. If pressure drops, still check the tire, valve, and rim edge; a damaged sidewall or larger cut requires proper repair or replacement.\u003c\/p\u003e\u003ch3\u003eTire inspection and installation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the tire if the tread is worn, or if there are cracks, bulges, or damaged edges. Before installation, remove debris and check the condition of the rim.\u003c\/li\u003e\n\u003cli\u003eDepressurize the wheel, remove the old tire, and install the new one without damaging the edge. Pay attention to any rotation direction arrow.\u003c\/li\u003e\n\u003cli\u003eSet the pressure according to the allowed values for the wheel and load. Check for even seating and free rotation; re-check the pressure before the next ride.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199278653705,"sku":"ULP3797.00","price":54.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-c9fee69c949e-7598fabb6dcd42f297fd1e804fcca0f8.jpg?v=1784119078"},{"product_id":"samozacelitvena-tubeless-pnevmatika-ulip-100-55-6-5-za-elektricni-skiro-dualtron-ultra-2","title":"Self-sealing tubeless tire ULIP 100\/55-6.5 for Dualtron Ultra 2 electric scooter","description":"\u003ch2\u003eULIP road tread with additional sealant layer\u003c\/h2\u003e\u003cp\u003eThe ULIP 100\/55-6.5 tubeless tire combines a wide road surface with slanted grooves and an internal sealant layer. It is installed without a separate inner tube onto a compatible rim.\u003c\/p\u003e\u003ch3\u003eFeatures and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Ultra 2.\u003c\/li\u003e\n\u003cli\u003eULIP 100\/55-6.5; road tread; tubeless with sealant layer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter: 257 mm.\u003c\/li\u003e\n\u003cli\u003eInner diameter: 163 mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 107 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe sealant layer may limit leakage in case of minor tread punctures. If pressure drops, still inspect the tire, valve, and rim edge; a damaged sidewall or larger cuts require professional repair or replacement.\u003c\/p\u003e\u003ch3\u003eTire inspection and installation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the tire if the tread is worn, or if there are cracks, bulges, or damaged edges. Before installation, remove any debris and check the rim condition.\u003c\/li\u003e\n\u003cli\u003eDeflate the wheel, remove the old tire, and install the new one without damaging the bead. Observe any rotation direction arrows.\u003c\/li\u003e\n\u003cli\u003eSet the pressure according to the wheel and load specifications. Check for uniform seating and free rotation; recheck the pressure before your next ride.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199278719241,"sku":"ULP3797.00","price":54.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-c9fee69c949e-7598fabb6dcd42f297fd1e804fcca0f8.jpg?v=1784119078"},{"product_id":"ojacan-zavorni-disk-160-mm-s-6-luknjami-za-elektricni-skiro-dualtron-3","title":"160 mm brake disc with 50 mm mounting circle for Dualtron 3","description":"\u003ch2\u003e160 mm disc with 50 mm mounting circle\u003c\/h2\u003e\u003cp\u003eThe silver brake disc has six holes on a 50 mm circle and a rounded wavy edge. Openings run along the braking ring; six screws are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron 3.\u003c\/li\u003e\n\u003cli\u003e160 mm disc; mounting hole circle 50 mm; six screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDisc diameter: 160 mm.\u003c\/li\u003e\n\u003cli\u003eMounting circle: 50 mm.\u003c\/li\u003e\n\u003cli\u003eDistance between adjacent holes: 25 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe distance between adjacent holes is 25 mm. Before ordering, verify this distance on your hub and the allowed disc thickness for your caliper. A six-bolt mount with a 44 mm circle is not the same design.\u003c\/p\u003e\u003ch3\u003eDisc replacement and alignment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the disc if there are cracks, permanent deformation, or wear below the minimum thickness. If you hear rubbing, check the caliper alignment first.\u003c\/li\u003e\n\u003cli\u003eClean the hub mounting surface and install the disc in the marked rotation direction. Tighten the screws gradually in a cross pattern to the specified torque.\u003c\/li\u003e\n\u003cli\u003eKeep the braking surface clean and free of oil or grease. After assembly, check for free rotation and braking performance; a new disc and pads require a proper bed-in process.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199280587017,"sku":"ULP5118.00","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-2bd2d19fde32-e498cef59b9e48c7b3219226c1ffa012.jpg?v=1784119079"},{"product_id":"ojacan-zavorni-disk-160-mm-s-6-luknjami-za-elektricni-skiro-dualtron-thunder","title":"160 mm brake disc with 50 mm bolt circle for Dualtron Thunder","description":"\u003ch2\u003e160 mm disc with 50 mm mounting circle\u003c\/h2\u003e\u003cp\u003eThe silver brake disc has six holes on a 50 mm circle and a rounded, wavy edge. The openings run along the brake ring; six screws are included.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dualtron Thunder.\u003c\/li\u003e\n\u003cli\u003e160 mm disc; mounting hole circle 50 mm; six screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDisc diameter: 160 mm.\u003c\/li\u003e\n\u003cli\u003eMounting circle: 50 mm.\u003c\/li\u003e\n\u003cli\u003eSpacing between adjacent holes: 25 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe spacing between adjacent holes is 25 mm. Before ordering, check this spacing on your hub and the allowed disc thickness for your caliper. A six-bolt mount with a 44 mm circle is not the same design.\u003c\/p\u003e\u003ch3\u003eDisc replacement and alignment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplace the disc in case of cracks, permanent deformation, or wear below the allowed thickness. If there is rubbing, check the caliper alignment as well.\u003c\/li\u003e\n\u003cli\u003eClean the hub mounting surface and install the disc in the indicated direction of rotation. Tighten the screws gradually in a cross pattern to the specified torque.\u003c\/li\u003e\n\u003cli\u003eKeep the braking surface clean and free of oil. After assembly, check for free rotation and braking; new discs and pads require proper bedding-in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57199280619785,"sku":"ULP5118.00","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/ulp-2bd2d19fde32-e498cef59b9e48c7b3219226c1ffa012.jpg?v=1784119079"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/collections\/DUALTRON_LOGO.webp?v=1788882855","url":"https:\/\/www.evolt.si\/en\/collections\/spare-parts-for-dualtron-electric-scooters.oembed","provider":"eVolt.si","version":"1.0","type":"link"}