{"product_id":"39-mm-kovinski-podaljsek-ventila-za-polnjenje-pnevmatik","title":"Metal valve extension – 39 mm","description":"\u003ch2\u003eMetal valve extension for recessed valves\u003c\/h2\u003e\u003cp\u003eA straight metal extension with a nominal length of 39 mm moves the valve access point outward. The knurled center section provides grip during tightening.\u003c\/p\u003e\u003ch3\u003eFeatures and fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStraight metal valve extension, approx. 39 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApproximate dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtension length: 39.4 mm, nominal 39 mm.\u003c\/li\u003e\n\u003cli\u003eOuter body diameter: 9 mm.\u003c\/li\u003e\n\u003cli\u003eOuter top thread diameter: 7.6 mm.\u003c\/li\u003e\n\u003cli\u003eInner opening at the bottom end: 6.8 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the thread and seal on the connection side. Tighten the extension by hand without excessive force, attach the pump, and inflate the tire. Remove it before riding if it interferes with moving parts, and verify the valve seal.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eAlign the extension with the valve and tighten without force. After inflation, check for leaks and replace the cap. Ensure the metal part does not strike the brake caliper, hub, or fork while the wheel is rotating.\u003c\/p\u003e","brand":"ULIP","offers":[{"title":"Default Title","offer_id":57253179851017,"sku":"ULP409.10","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/2316\/5961\/files\/39-mm-kovinski-podaljsek-ventila-za-polnjenje-pnevmatik-01.webp?v=1786537306","url":"https:\/\/www.evolt.si\/en\/products\/39-mm-metal-tire-valve-extension","provider":"eVolt.si","version":"1.0","type":"link"}