Set of anti-slip 22mm handlebar grips for Electric Scooter Kugoo G-Booster

Ergonomic palm support and locking rings

This pair of black grips features extended palm support and a textured gripping surface. Each grip is secured to the compatible handlebar with a locking ring.

Features and fitment

• Model: Kugoo G-Booster.
• Pair of black ergonomic grips with locking rings; length approximately 127 mm; handlebar 22 mm.

Approximate dimensions

• Grip length: 127 mm.
• Inner end diameter: 32 mm.
• Palm support width: 46 mm.
• Locking ring width: 39.5 mm.
• Nominal handlebar diameter: 22 mm.

The length is approximately 127 mm, and the nominal handlebar diameter is 22 mm. Measure the free length next to the throttle and brake before choosing. Adjust the support angle according to your natural wrist position and ensure the grip does not rotate.

Support and grip adjustment

• Remove the old grips, then clean and dry the handlebars. Before tightening, ensure the new grip sits fully on the designated part of the handlebar tube.
• Adjust the position for a relaxed wrist angle and easy access to the brake lever. Tighten the locking rings (where present) according to instructions and ensure the grip does not rotate.
• Verify that the throttle return is unobstructed. Replace torn, hardened, or slippery grips; do not apply lubricant to the gripping surface.