Brake Disc 140 mm with 6 Holes for Electric Scooter Kugoo G-Booster

140 mm brake disc with 44 mm bolt hole pattern

This silver brake disc features a 140 mm diameter and six mounting holes on a 44 mm circle. The cutouts run along the braking surface, and six bolts are included in the replacement kit.

Features and fitment

• Model: Kugoo G-Booster.
• 140 mm diameter; 6 holes; 44 mm bolt hole circle diameter.
• Six bolts included.

Approximate dimensions

• Disc diameter: 140 mm.
• Bolt hole circle: 44 mm.
• Hole spacing: 22 and 38 mm.

The distance between adjacent mounting holes is 22 mm. When selecting, consider the 140 mm diameter, the 44 mm bolt circle, and the thickness allowed by the caliper.

Disc replacement and alignment

• Replace the disc if it shows cracks, permanent deformation, or wear below the minimum allowable thickness. If rubbing occurs, check the caliper alignment first.
• Clean the hub mounting surface and install the disc in the indicated direction of rotation. Tighten the bolts gradually in a cross pattern to the specified torque.
• Keep the braking surface clean and free of grease. After assembly, check for free rotation and braking performance; a new disc and pads require proper bedding-in.