160 mm brake disc for Dualtron Storm Limited – 50 mm bolt circle

160 mm disc brake with 50 mm bolt pattern

The silver 160 mm brake disc features six holes on a 50 mm bolt circle. Its distinctive design is defined by the wavy outer edge and openings along the braking surface.

Features and Compatibility

• Model: Dualtron Storm Limited.
• Diameter 160 mm; 6 holes; 50 mm mounting hole circle.
• Six bolts.

Approximate dimensions

• Disc diameter: 160 mm.
• Mounting circle: 50 mm.
• Distance between adjacent holes: 25 mm.

The distance between adjacent holes is 25 mm. The disc mounts to a compatible six-bolt hub with a 50 mm bolt circle.

Disc replacement and alignment

• Replace the disc if it has cracks, permanent deformation, or wear below the minimum thickness. If you notice rubbing, first check the brake caliper alignment.
• Clean the hub contact surface and mount the disc in the marked direction of rotation. Tighten the bolts gradually in a cross pattern to the specified torque.
• Keep the braking surface clean and free of grease. After installation, check for smooth operation and braking; new discs and pads require proper bedding-in.