160 mm Brake Disc for Dualtron Thunder/Ultra for Dualtron Thunder 2

Disc Brake 160 mm for Dualtron Thunder/Ultra for Dualtron Thunder 2

Model-specific replacement disc brake with a diameter of 160 mm for the Electric Scooter Dualtron Thunder 2. It is designed to replace worn, warped, or damaged discs. A correctly sized disc ensures even contact with the brake pads and predictable braking.

When is replacement recommended?

• When the disc causes pulsing or rubbing during braking
• When the braking surface is visibly damaged, overheated, or unevenly worn
• When the disc is warped or its thickness is below the manufacturer's allowed limit
• After damage to the mounting points or noticeable play

Technical Specifications

• Model: Dualtron Thunder 2
• Diameter: 160 mm
• Mounting: Check the mounting hole pattern
• Type: Replacement disc brake
• SKU: ULP150.10
• Package includes: 1 disc brake

Before ordering

Check the outer diameter, thickness, number and arrangement of mounting holes, and disc offset. The same diameter does not guarantee compatibility, as the hub, caliper, or spacers may vary between model years and versions of the same model.

Installation and break-in

Installation should be performed by a qualified service technician. The mounting screws must be tightened evenly according to the manufacturer's instructions, and the caliper must be accurately centered after installation. Also, check the condition of the pads; heavily worn or contaminated pads can damage a new disc. Perform the first few braking maneuvers gradually to allow the braking surfaces to properly bed in.