Dupont connector kit 2.54 mm – 620 pieces

620-piece connector set with 2.54 mm spacing

The Dupont kit contains 200 male pins, 200 female pins, and 220 black plastic housings. Single-row and double-row housings are sorted in a transparent box with compartments.

Features and fitment

• 620 pieces: 200 male and 200 female pins, and 220 housings.
• 2.54 mm pin spacing; single-row and double-row black housings.
• Compartment box; wires and crimping tools are not included.
• Single-row housings: 1 × 1 (50 pcs), 1 × 2 (40 pcs), 1 × 3, 1 × 4, 1 × 5, and 1 × 6 (20 pcs each).
• Double-row housings: 2 × 2, 2 × 3, 2 × 4, 2 × 5, and 2 × 6 (10 pcs each).

Approximate dimensions

• Pin spacing: 2.54 mm.
• Height of single-row housing: 13.95 mm.
• Thickness of single-row housing: 2.54 mm.
• Widths of single-row housings 1–6 pins: 2.54 / 5.08 / 7.62 / 10.16 / 12.70 / 15.24 mm.
• Distances between outer pins for 2–6 pins: 2.54 / 5.08 / 7.62 / 10.16 / 12.70 mm.
• Male pin: length 18.60 ± 0.25 mm.
• Cross-section of the connecting pin: 0.64 ± 0.10 mm in both directions.
• Thickness of the contact strip: 0.20 mm.
• Holes on the contact carrier strip: diameter 1.50 mm.

Pin spacing is 2.54 mm. The kit is intended for making or repairing signal connections; for crimping, you need suitable pliers and wire of the appropriate cross-section. Pliers and wires are not part of the kit.

Installation and use

Crimp the pin onto the prepared conductor with pliers of appropriate geometry. Then, insert it into the housing, and check that it clicks into place and that the wire sequence is correct. The joints are not waterproof; the kit is not intended for main power connections of the battery and motor.