Hybrid self-sealing tubeless tire ULIP 10x2.75-6.5 for SmartGyro Rockway C

Hybrid self-sealing tubeless tire ULIP 10x2.75-6.5 for SmartGyro Rockway C

Hybrid profile: Densely packed low blocks with channels between them.

The 10x2.75-6.5 tire for SmartGyro Rockway C features a block profile and an inner layer of sealing gel. This is an outer tubeless tire; the rim, valve, and inner tube are not included.

Design and dimensions

• Tire dimension marking: 10x2.75-6.5.
• Vehicle model: SmartGyro Rockway C, version with a compatible 6.5-inch rim.
• Approximate outer diameter: 243 mm.
• Approximate inner diameter of an unmounted tire: 165 mm.
• Approximate width: 79.2 mm.
• Approximate weight: 1100 g.

On the inside, there is a layer of sealing gel intended to reduce air leakage from small punctures in the tread area. This is not a solid tire, and the gel does not repair major damage or sidewall damage.

Compatibility with SmartGyro Rockway C

Compatibility applies to the version with the 10x2.75-6.5 or 80/55-6.5 dimension and a compatible 6.5-inch rim. Before ordering, compare the full marking of your old tire, the width and bead seat of the rim, and the clearance around the fork, brake, and mudguard. Different treads of the same nominal size may have different actual widths.

Installation

For tubeless use, the rim must be airtight and equipped with a suitable tubeless valve. Release the air before removal; mount the new tire without damaging the edge and in the marked direction of rotation. After installation, check for even seating, airtightness, and free rotation of the wheel. Adjust the pressure according to vehicle guidelines and the tire/rim limits.