ULIP hybrid tubeless tire 10x2.75-6.5 for Ausom DT2 Pro

ULIP 10x2.75-6.5 hybrid tubeless tire for Ausom DT2 Pro

Hybrid profile: Densely spaced low blocks with channels between them.

The 10x2.75-6.5 tire for the Ausom DT2 Pro features low blocks and transverse channels in a hybrid profile. This is an outer tire for tubeless use; the rim, valve, and inner tube are not included.

Design and dimensions

• Dimension marking on the tire: 10x2.75-6.5.
• Vehicle model: Ausom DT2 Pro, version with a compatible 6.5-inch rim.
• Approximate outer diameter: 240 mm.
• Approximate inner diameter of the uninflated tire: 161 mm.
• Approximate width: 83 mm.
• Approximate weight: 726.6 g.

On the sidewall, there are TUBELESS and NYLON markings as well as a rotation direction arrow. The maximum load rating of 85 kg at 45 PSI applies to the tire; it does not determine the allowed load capacity of the entire scooter.

Fitment for Ausom DT2 Pro

Compatibility applies to the version with 10x2.75-6.5 or 80/55-6.5 sizing and a compatible 6.5-inch rim. Before ordering, compare the full marking on your old tire, the width and the sealing bead of the rim, as well as the clearance around the fork, brake, and mudguard. Different tread patterns with the same nominal dimensions can have different actual widths.

Installation

For tubeless use, the rim must be airtight and equipped with a suitable tubeless valve. Deflate the tire before removal; install the new tire without damaging the bead and in the marked direction of rotation. After installation, check that it is seated evenly, that it seals correctly, and that the wheel rotates freely. Set the pressure according to vehicle specifications and the limits of the tire and rim.