10x2.75-6.5 hybrid tubeless tire for Dualtron 3

Hybrid tubeless tire 10x2.75-6.5 for Dualtron 3

Hybrid tread: Densely spaced low blocks with channels between them.

The 10 × 2.75-6.5 black tire for Dualtron 3 has low tread blocks and transverse channels. The TUBELESS marking on the sidewall indicates a tubeless version, which requires a compatible tubeless rim and valve for proper sealing. The outer tire replaces a worn or damaged one; the rim is not included.

Features and dimensions

• Size designation: 10 × 2.75-6.5.
• Vehicle model: Dualtron 3; compare the full size and rim design.
• Design: Tubeless, black tire with a low block tread profile.
• Approximate outer diameter: 240 mm.
• Approximate inner diameter: 161 mm.
• Approximate width: 83 mm.
• Weight: approximately 726.6 g.
• Load construction designation: NYLON.
• The arrow on the sidewall indicates the direction of rotation.
• Stated maximum tire load: 85 kg (187 lb) at 45 PSI (300 kPa). This figure does not determine the total load capacity of the scooter or its recommended pressure.

When to replace and how to install

• Replace the tire if the tread is heavily worn, cracked, bulging, or if the edge is damaged. Also check clearance near the fender and brake.
• Release all air before disassembly. Clean the rim edge, check the valve, and install the new tire in the marked direction of rotation without damaging the sealing edge.
• Check for even seating around the entire circumference and proper sealing. Set the pressure according to vehicle guidelines and the limitations of the tire and rim; recheck it before your next ride.