ULIP 10x2.75-6.5 hybrid tubeless tire for Ausom DT2 Pro

Hybrid tubeless tire ULIP 10x2.75-6.5 for Ausom DT2 Pro

Hybrid tread: Densely spaced low blocks with channels in between.

The 10x2.75-6.5 tire for Ausom DT2 Pro has wide center blocks and narrower channels at the shoulders. This is an outer tubeless tire; the rim, valve, and inner tube are not included.

Design and dimensions

• Dimension marking on the tire: 10x2.75-6.5.
• Vehicle model: Ausom DT2 Pro, version with a compatible 6.5-inch rim.
• Approximate outer diameter: 249 mm.
• Approximate inner diameter of the uninflated tire: 164 mm.
• Approximate width: 80 mm.
• Approximate weight: 900 g.

Fitment on Ausom DT2 Pro

Compatibility applies to the version with 10x2.75-6.5 or 80/55-6.5 dimension and a compatible 6.5-inch rim. Before ordering, compare the full marking of your old tire, the width and seal seat of the rim, and the clearance near the fork, brake, and fender. Different treads of the same nominal size have different actual widths.

Installation

For tubeless use, the rim must be airtight and equipped with a suitable tubeless valve. Deflate before removal; install the new tire without damaging the bead and in the marked direction of rotation. After installation, check for even seating, airtightness, and free rotation of the wheel. Set the pressure according to vehicle instructions and the tire and rim limitations.