Reinforced inner tube 10 × 2.5 with 90° valve for Dualtron Spider Max

Reinforced ULIP inner tube with angled valve

The ULIP 10 × 2.5 inner tube has a reinforced design and a metal valve with a 90-degree bend. It is intended for a compatible ten-inch wheel assembly with an inner tube.

Features and fitment

• Model: Dualtron Spider Max.
• Reinforced ULIP inner tube 10 × 2.5; bent valve 90°.

Approximate dimensions

• Outer diameter of inner tube: 235 mm.
• Inner diameter of inner tube: 148 mm.
• Width of inner tube: 43 mm.
• Bent valve: length 35 mm, angle 90°.

In addition to tire dimensions, check the valve orientation and accessibility near the motor. The valve should emerge from the rim hole without tension, with enough space to attach a pump.

Replacement without pinching the inner tube

• Before replacing, look for the cause of the puncture in the tire or on the rim. A foreign object, sharp edge, or damaged rim tape can immediately damage the new inner tube as well.
• Slightly inflate the inner tube, align the valve with the opening, and distribute it evenly inside the tire. When seating the edge, do not pinch it with mounting tools.
• Fill to the pressure allowed for the wheel assembly. Check the position of the valve and sealing; do not use the valve cap to stop leaks.