Original 53.6 V 1.3 A charger for Segway Ninebot F3 Pro

Original 53.6 V 1.3 A charger for Segway Ninebot F3 Pro

The original 53,6 V / 1,3 A charger uses a straight, round O connector.

The black Segway charger has a rated output of 53,6 V / 1,3 A and a maximum charging voltage of 54,6 V. It uses a round O connector and a detachable mains cable.

Features and fitment

• Model: Segway Ninebot F3 Pro.
• Segway Ninebot charger with a round O connector.
• Charging current 1,3 A; rated output 53,6 V, maximum output voltage 54,6 V.
• EU power cable; housing approximately 133 × 57,5 × 32,5 mm.

Approximate dimensions

• Charger: 133 × 57.5 × 32.5 mm.
• Packaging: 169 × 115 × 50 mm.

Before choosing, compare the connector, polarity and required charging output; the battery must support a current of 1,3 A.

Charger use and inspection

• Before connecting, check that the socket is dry and the cable is undamaged. Do not force the plug; follow the connection sequence in the vehicle instructions.
• During charging, keep the charger on a dry, ventilated surface and do not cover it. Disconnect it as instructed when charging is complete.
• If the battery does not accept a charge, also inspect the socket and wiring. Replacing the charger does not fix a battery fault; stop using a damaged unit.