160 mm brake disc with 50 mm bolt circle for Dualtron Thunder

160 mm disc with 50 mm mounting circle

The silver brake disc has six holes on a 50 mm circle and a rounded, wavy edge. The openings run along the brake ring; six screws are included.

Features and fitment

• Model: Dualtron Thunder.
• 160 mm disc; mounting hole circle 50 mm; six screws.

Approximate dimensions

• Disc diameter: 160 mm.
• Mounting circle: 50 mm.
• Spacing between adjacent holes: 25 mm.

The spacing between adjacent holes is 25 mm. Before ordering, check this spacing on your hub and the allowed disc thickness for your caliper. A six-bolt mount with a 44 mm circle is not the same design.

Disc replacement and alignment

• Replace the disc in case of cracks, permanent deformation, or wear below the allowed thickness. If there is rubbing, check the caliper alignment as well.
• Clean the hub mounting surface and install the disc in the indicated direction of rotation. Tighten the screws gradually in a cross pattern to the specified torque.
• Keep the braking surface clean and free of oil. After assembly, check for free rotation and braking; new discs and pads require proper bedding-in.