Reinforced inner tube 10 × 2.5 with 90° valve for Blade GT electric scooter

ULIP reinforced inner tube with angled valve

The ULIP 10 x 2.5 inner tube features a reinforced design and a 90-degree angled metal valve. It is intended for a compatible ten-inch wheel assembly using an inner tube.

Features and compatibility

• Model: Blade GT.
• ULIP reinforced inner tube 10 x 2.5; 90° angled valve.

Approximate dimensions

• Outer diameter of inner tube: 235 mm.
• Inner diameter of inner tube: 148 mm.
• Width of inner tube: 43 mm.
• Angled valve: length 35 mm, angle 90°.

In addition to the tire dimension, check the valve direction and accessibility near the motor. The valve should protrude from the rim hole without tension, with enough room to attach a pump.

Changing without pinching the tube

• Before changing, find the cause of the puncture in the tire or on the rim. Foreign objects, sharp edges, or damaged rim tape can damage a new tube immediately.
• Inflate the tube slightly, align the valve with the opening, and distribute it evenly in the tire. When seating the bead, do not pinch it with mounting tools.
• Inflate to the pressure permitted for the wheel assembly. Check the position of the valve and check for leaks; do not use valve caps to stop leaks.