ULIP reinforced inner tube 10×2.75-6.5 for ZERO 10 / ECO Speed 10

ULIP reinforced inner tube with 90-degree valve

The ULIP 10 × 2.75-6.5 inner tube features a thicker wall design and a metal valve bent at a right angle. A black protective cap is included on the valve.

Features and fitment

• Model: ZERO 10 / ECO Speed 10.
• ULIP 10×2.75-6.5 reinforced inner tube.
• Metal valve is bent outwards at 90°.

Approximate dimensions

• Outer diameter of the inner tube: 244 mm.
• Inner diameter: 153 mm.
• Width: 45.1 mm.
• Length of the bent valve: 36 mm.
• Packaging: 150 × 72 × 62 mm.
• Packaging hanger tab: 50 × 22.5 mm.

Before installation, compare the tire size and valve orientation relative to the motor hub. Remove any debris and check the rim edges, then insert the inner tube without twists or pinching.

Replacement without pinching the inner tube

• Before replacing, identify the cause of the puncture in the tire or on the rim. Foreign objects, sharp edges, or damaged rim tape can immediately damage the new inner tube as well.
• Inflate the inner tube slightly, align the valve with the opening, and distribute it evenly inside the tire. When seating the bead, take care not to pinch it with mounting tools.
• Inflate to the pressure allowed for your wheel assembly. Check the valve position and for leaks; do not use the valve cap to stop a leak.