ULIP 10x2.75-6.5 hybrid self-sealing tubeless tire for Techlife X9

ULIP 10x2.75-6.5 hybrid self-sealing tubeless tire for Techlife X9

Hybrid profile: Densely packed low blocks with grooves in between.

The 10x2.75-6.5 tire for Techlife X9 features a block tread pattern and an inner sealing gel layer. This is an outer tire in a tubeless design; the rim, valve, and inner tube are not included.

Design and dimensions

• Dimension marking on the tire: 10x2.75-6.5.
• Vehicle model: Techlife X9, version with a compatible 6.5-inch rim.
• Approximate outer diameter: 243 mm.
• Approximate inner diameter (uninflated): 165 mm.
• Approximate width: 79.2 mm.
• Approximate weight: 1100 g.

There is a layer of sealing gel on the inside, designed to reduce air leakage in case of minor tread punctures. This is not a solid tire, and the gel does not repair major damage or sidewall punctures.

Fitment for Techlife X9

Compatibility applies to the version with 10x2.75-6.5 or 80/55-6.5 dimensions and a suitable 6.5-inch rim. For this model, it is necessary to check the year and version of the scooter specifically; the model name alone is not enough. Before ordering, compare the full marking of your old tire, the width and seal seat of the rim, as well as the clearance by the forks, brakes, and fender. Different tread patterns of the same nominal dimension have different actual widths.

Installation

For tubeless use, the rim must be airtight and equipped with a suitable tubeless valve. Release the air before disassembly; install the new tire without damaging the rim edge and in the marked rotation direction. After installation, check for even seating, sealing, and free wheel rotation. Set the pressure according to the vehicle manual and the limits of the tire and rim.