Black ergonomic grips for Hiley Tiger 10 V5 – grip 120 mm, total 131 mm

Ergonomic black grips with clamps on both ends

This pair of black grips features a textured surface and extended palm support. Clamps on both ends prevent the properly installed grip from rotating on the handlebars.

Features and fitment

• Model: Hiley Tiger 10 V5.
• Pair of black ergonomic grips with palm support.
• Grip area 120 mm; total length 131 mm.
• Mounting 22.2 mm; clamps on both ends.

Approximate dimensions

• Grip area length: 120 mm.
• Total length: 131 mm.
• Diameter at the inner end: 32 mm.
• Width of support: 44 mm.
• Mounting diameter: 22.2 mm.

The grip area measures 120 mm, and the total length with end caps is approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the clearance near the throttle and brake lever; do not force the shorter right grip onto a twist-throttle.

Adjusting the support and grip

• Remove the old grips and clean and dry the handlebars. Before tightening, ensure that the new grip sits completely on the intended part of the bar.
• Adjust the position for a relaxed wrist and comfortable brake lever reach. Tighten the clamping parts where present according to the instructions and check that the grip does not rotate.
• Check for free throttle return. Replace torn, hardened, or slippery grips; do not apply lubricant to the gripping surface.