Black ergonomic grips for Hiley Tiger Evo GT – grip 120 mm, total 131 mm

Ergonomic black grips with dual locking clamps

This pair of black grips features a textured surface and extended palm rest. Locking clamps at both ends prevent the properly installed grip from rotating on the handlebars.

Features and fitment

• Model: Hiley Tiger Evo GT.
• Pair of black ergonomic grips with palm rests.
• Grip area 120 mm; total length 131 mm.
• Mounting 22.2 mm; locking clamps at both ends.

Approximate dimensions

• Grip area length: 120 mm.
• Total length: 131 mm.
• Diameter at inner end: 32 mm.
• Support width: 44 mm.
• Mounting diameter: 22.2 mm.

The grip area measures 120 mm, with a total length including ends of approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the space around the throttle and brake lever; do not force a replacement if the right grip is shorter due to a twist-throttle.

Setting up support and grip

• Remove the old grips, then clean and dry the handlebars. Before fastening, check that the new grip sits fully on the intended part of the tube.
• Adjust the position for a relaxed wrist and ease of reaching the brake lever. Tighten the locking parts (if present) according to the instructions and verify that the grip does not rotate.
• Check for free throttle return. Replace torn, hardened, or slippery grips; do not apply lubricant to the gripping surface.