Black ergonomic handlebar grips for VSETT 8 Apex – grip area 120 mm, total 131 mm

Ergonomic black grips with clamps on both ends

The pair of black grips has a textured surface and extended palm support. Clamps on both ends restrict the rotation of the properly installed grip on the handlebar.

Features and fitment

• Model: VSETT 8 Apex.
• Pair of black ergonomic grips with palm support.
• Grip area 120 mm; total length 131 mm.
• Mounting 22.2 mm; clamps on both ends.

Approximate dimensions

• Grip area length: 120 mm.
• Total length: 131 mm.
• Diameter at the inner end: 32 mm.
• Support width: 44 mm.
• Mounting diameter: 22.2 mm.

The grip area measures 120 mm, and the total length with end caps is approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the space around the throttle and brake lever; do not force the shorter right grip if there is a twist throttle.

Support and grip adjustment

• Remove the old grips, and clean and dry the handlebar. Before tightening, check that the new grip fully sits on the designated part of the bar.
• Adjust the position for a relaxed wrist and access to the brake lever. Tighten the clamping parts, where present, according to instructions and ensure the grip does not rotate.
• Check for free throttle return. Replace torn, hardened, or slippery grips; do not apply lubricant to the gripping surface.