ULIP 10x2.75-6.5 hybrid self-sealing tubeless tire for Speedway 4

ULIP 10x2.75-6.5 hybrid self-sealing tubeless tire for Speedway 4

Hybrid tread: Closely spaced low blocks with channels between them.

The 10x2.75-6.5 tire for Speedway 4 has a block tread and an inner layer of sealing gel. This is a tubeless outer tire; rim, valve and inner tube are not included.

Construction and dimensions

• Size marked on the tire: 10x2.75-6.5.
• Vehicle model: Speedway 4, version with a suitable 6,5-inch rim.
• Approximate outer diameter: 243 mm.
• Approximate inner diameter of the uninflated tire: 165 mm.
• Approximate width: 79.2 mm.
• Approximate weight: 1100 g.

An inner layer of sealing gel is intended to reduce air loss from small punctures in the tread. This is not a solid tire, and the gel does not repair larger damage or sidewall damage.

Fitment on Speedway 4

Compatibility applies to the version with size 10x2.75-6.5 or 80/55-6.5 and a suitable 6,5-inch rim. Before ordering, compare the full marking on the old tire, the rim width and sealing seat, and the clearance around the fork, brake and mudguard. Different tread patterns of the same nominal size have different actual widths.

Installation

For tubeless use, the rim must be airtight and fitted with a suitable tubeless valve. Deflate before removal; install the new tire without damaging the bead and in the marked rotation direction. After installation, check even seating, sealing and free wheel rotation. Set the pressure according to the vehicle instructions and the tire and rim limits.