ULIP 10x2.75-6.5 hybrid tubeless tire for Speedway 5

Hybrid tubeless tire ULIP 10x2.75-6.5 for Speedway 5

Hybrid profile: Densely arranged low blocks and channels between them.

The 10x2.75-6.5 tire for Speedway 5 has wide center blocks and narrower channels along the shoulders. This is an outer tubeless tire casing; the rim, valve, and inner tube are not included.

Design and Dimensions

• Size marking on tire: 10x2.75-6.5.
• Vehicle model: Speedway 5, version with compatible 6.5-inch rim.
• Approximate outer diameter: 249 mm.
• Approximate inner diameter of uninflated casing: 164 mm.
• Approximate width: 80 mm.
• Approximate weight: 900 g.

Compatibility with Speedway 5

Compatibility applies to the version with the 10x2.75-6.5 or 80/55-6.5 dimension and a compatible 6.5-inch rim. Before ordering, compare the full marking of the old tire, the rim width and sealing seat, and the clearance by the fork, brake, and mudguard. Different tread patterns of the same nominal dimension have different actual widths.

Installation

For tubeless use, the rim must be airtight and equipped with a suitable tubeless valve. Release air before removal; install the new tire without damaging the bead and in the marked rotation direction. After installation, check for even seating, sealing, and free rotation of the wheel. Adjust pressure according to vehicle instructions and tire/rim limitations.