10x2.75-6.5 hybrid tubeless tire for Ausom L1

Hybrid tubeless tire 10x2.75-6.5 for Ausom L1

Hybrid tread: Densely spaced low blocks and channels between them.

The 10x2.75-6.5 tire for Ausom L1 features low blocks and transverse channels in a hybrid pattern. This is an outer casing in a tubeless design; the rim, valve, and inner tube are not included.

Design and dimensions

• Dimension label on the tire: 10x2.75-6.5.
• Vehicle model: Ausom L1, version with a compatible 6.5-inch rim.
• Approximate outer diameter: 240 mm.
• Approximate inner diameter of an uninflated tire: 161 mm.
• Approximate width: 83 mm.
• Approximate weight: 726.6 g.

The sidewall features the marks TUBELESS and NYLON, as well as a rotation direction arrow. The maximum load rating of 85 kg at 45 PSI applies to the tire; it does not determine the permitted payload of the entire scooter.

Fitment on Ausom L1

Compatibility applies to versions with 10x2.75-6.5 or 80/55-6.5 dimensions and a compatible 6.5-inch rim. Before ordering, compare the full label of the old tire, the width and seating bead of the rim, and clearance near the forks, brake, and fender. Different treads of the same nominal dimension may have different actual widths.

Installation

For tubeless use, the rim must be airtight and equipped with a suitable tubeless valve. Before disassembly, release the air; install the new tire without damaging the bead and in the marked direction of rotation. After installation, check for even seating, proper sealing, and free rotation of the wheel. Set the pressure according to the vehicle instructions and the tire/rim limitations.