Adjustable bike kickstand – M6 mount, 40 mm spacing for SUPER73 RX Mojave

Shorter adjustable kickstand with an extended foot

This black kickstand for a suitable 20–22-inch bike features two mounting points and an extendable lower leg. The extended foot increases the contact surface on the ground.

Features and fitment

• Model: SUPER73 RX Mojave.
• Black adjustable kickstand; length approx. 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 bolts, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. An appropriate mounting point with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bike and check clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing on the appropriate rear left part of the frame are required. Also, check the necessary kickstand length and the clearance near the brake and chain.

Stable support when parking

• Attach the kickstand to the designated frame section and adjust the length for a moderate tilt of the parked vehicle. A setting that is too short or too long will reduce stability.
• Ensure the folded kickstand does not hit the wheel, brake, or drivetrain components. The vehicle should stand stably on solid ground before releasing your grip.
• The kickstand is intended for parking only. Do not add body weight while sitting on the vehicle, and check the mount and bolts after a strong impact.