Adjustable bike kickstand – M6 mounting, 40 mm spacing for SUPER73 RX

Short adjustable kickstand with enlarged foot

This black kickstand for a suitable 20–22 inch wheel has two mounting points and an extendable lower leg. The enlarged foot increases the contact surface area on the ground.

Features and fitment

• Model: SUPER73 RX.
• Black adjustable kickstand; length approximately 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 bolts, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. A suitable mounting point with 40 mm spacing and M6 threads is required. Adjust the lean of the parked bike and check clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing on the corresponding left rear frame section are required. Also check the required kickstand length and clearance around the brake and chain.

Stable support when parking

• Attach the kickstand to the designated part of the frame and adjust the length for a moderate lean of the parked vehicle. An adjustment that is too short or too long reduces stability.
• Check that the folded kickstand does not hit the wheel, brake, or drivetrain components. The vehicle should be stable on solid ground before you release your hold.
• The kickstand is designed for parking. Do not apply additional body weight while sitting on the vehicle; check the mount and bolts after a significant impact.