Magura MT5/MT7 brake pads for Raleigh Ashford S55 – Magura MT5/MT7

Dual friction area for compatible Magura caliper

Each black backing plate features two separate friction zones and an extended top tab. This design is intended for the compatible Magura MT5, MT5e, or MT7 caliper.

Features and fitment

• Model: Raleigh Ashford S55.
• Black backing plates with two separate friction pad surfaces on each.
• Design for Magura MT5/MT7.

Check the actual brake on your vehicle before choosing. While the pads fit the specified caliper design including when appropriately upgraded, they are not a direct drop-in replacement for stock pads of a different brand.

Only for Magura MT5, MT5e, or MT7 calipers with compatible pad shape. If your vehicle has a different caliper, these pads are not a direct replacement.

Brake pad

The friction material presses against the disc, while the carrier holds it in the correct position within the caliper. Replace both pads together if they are worn, damaged, or contaminated with oil. During installation, also check the retaining clip and ensure the wheel spins freely.

When to replace and how to start

• Inspect the pads in case of reduced braking, uneven wear, or contamination. Always replace both pads in the same caliper; check the minimum allowed thickness in your brake manual.
• Remove the retaining clip and the old pair. After following the procedure for your specific caliper to create space for new pads, insert the spring, the new pair, and the retaining clip. Do not grease the friction surfaces.
• Check the free rotation of the wheel and the lever feel. Break in new pads with multiple gradual stops in a safe area, without locking the wheel.