NUTT Y5 Hydraulic Brake Kit for Kaabo Wolf King

NUTT Y5 hydraulic brake set for Kaabo Wolf King

The brake set for the front and rear of the Kaabo Wolf King model includes left and right NUTT Y5 levers, two black calipers, and hydraulic hoses of different lengths. The signal cables on the levers are intended for the motor cut-off function during braking.

Contents and dimensions

• Front hose: 1300 mm; rear hose: 2100 mm according to supplier data.
• Two NUTT Y5 levers, approximately 180 mm long, with a clamp diameter of approximately 22.5 mm.
• Lever signal cables: approximately 384 mm, with red-marked connectors.
• The caliper shown measures approximately 88.6 × 61.5 × 44 mm; the mounting hole spacing is approximately 52 mm.
• Includes hose fittings and bolts shown in the photos.
• Brake discs are not included.

Fitment and installation

When installing on a Kaabo Wolf King, compare the mounting side of both calipers, brackets, the diameter and thickness of existing discs, and the signal connectors. The hoses must allow for proper routing without tension during full handlebar rotation and suspension movement. When upgrading existing brakes, suitable adapters may be required; the same bolt spacing alone does not guarantee the correct pad position on the disc.

Installation and use

Installation, hose connection, and bleeding should be performed by a qualified technician. Before use, check for leaks, free rotation of both wheels, and proper operation of the brake motor cut-off, and bed in the pads correctly.