ULIP reinforced 10×2.75-6.5 inner tube for ZERO 10X Limited 160

Reinforced ULIP inner tube with 90-degree valve

The ULIP 10 × 2.75-6.5 inner tube features a thicker wall design and a metal valve bent at a right angle. There is a black protective cap on the valve.

Features and fitment

• Model: ZERO 10X Limited 160.
• Reinforced ULIP 10×2.75-6.5 inner tube.
• Metal valve is bent 90° outwards.

Approximate dimensions

• Outer diameter of inner tube: 244 mm.
• Inner diameter: 153 mm.
• Width: 45.1 mm.
• Bent valve length: 36 mm.
• Packaging: 150 × 72 × 62 mm.
• Packaging hang tab: 50 × 22.5 mm.

Before installation, compare the tire size and valve direction relative to the motor hub. Remove foreign objects and check the rim edges, then insert the inner tube without kinks or pinching.

Replacement without pinching the inner tube

• Before replacing, find the cause of the puncture in the tire or on the rim. A foreign object, sharp edge, or damaged rim tape can immediately damage even a new inner tube.
• Inflate the inner tube slightly, align the valve with the hole, and distribute it evenly within the tire. When installing the edge, do not pinch it with tire levers.
• Inflate to the pressure allowed for the wheel assembly. Check the valve position and sealing; do not use the valve cap to stop leaks.