Hybrid self-sealing tubeless tire ULIP 10x2.75-6.5 for Ausom L2 Max

ULIP 10x2.75-6.5 hybrid self-sealing tubeless tire for Ausom L2 Max

Hybrid profile: Densely spaced low blocks and channels between them.

The 10x2.75-6.5 tire for Ausom L2 Max has a block profile and an inner layer of sealing gel. This is an outer tubeless tire; the rim, valve, and inner tube are not included.

Design and dimensions

• Size marking on the tire: 10x2.75-6.5.
• Vehicle model: Ausom L2 Max, version with the corresponding 6.5-inch rim.
• Approximate outer diameter: 243 mm.
• Approximate inner diameter of the uninflated tire: 165 mm.
• Approximate width: 79.2 mm.
• Approximate weight: 1100 g.

On the inside, there is a layer of sealing gel intended to reduce air leakage from small punctures in the tread area. This is not a solid tire, and the gel does not fix major damage or sidewall damage.

Fitment for Ausom L2 Max

Compatibility applies to the version with the 10x2.75-6.5 or 80/55-6.5 dimension and the corresponding 6.5-inch rim. For single and dual motor versions, compare the marking on the tire of the specific bike. Before ordering, compare the full marking of the old tire, the width, and the sealing seat of the rim, as well as the clearance by the forks, brake, and fender. Different profiles of the same nominal size have different actual widths.

Installation

For tubeless use, the rim must be airtight and equipped with a suitable tubeless valve. Before disassembly, release the air; install the new tire without damaging the bead and in the marked direction of rotation. After installation, check for even seating, sealing, and free rotation of the wheel. Adjust the pressure according to the vehicle's instructions and the tire and rim limits.