160 mm brake disc for Dualtron Thunder 3 – 50 mm mounting circle

160 mm brake disc with 50 mm bolt pattern spacing

The 160 mm silver brake disc features six holes on a 50 mm bolt circle. A wavy outer edge and openings along the braking surface define its distinct design.

Features and fitment

• Model: Dualtron Thunder 3.
• Diameter 160 mm; 6 holes; 50 mm bolt pattern circle.
• Six bolts.

Approximate dimensions

• Disc diameter: 160 mm.
• Bolt circle: 50 mm.
• Distance between adjacent holes: 25 mm.

The spacing between adjacent holes is 25 mm. The disc attaches to a compatible six-bolt hub with a 50 mm bolt circle.

Disc replacement and alignment

• Replace the disc if there are cracks, permanent deformation, or wear below the minimum thickness. If rubbing occurs, first check the brake caliper alignment.
• Clean the hub contact surface and install the disc in the marked direction of rotation. Tighten the bolts gradually in a cross-pattern to the specified torque.
• Keep the braking surface clean and free of grease. After assembly, check for free movement and braking efficiency; new discs and pads require proper bedding-in.