Adjustable bike kickstand – M6 mounting, 40 mm spacing for i:SY P12 ZR

Shorter adjustable kickstand with an extended foot

The black kickstand for a suitable 20–22-inch bike has two mounting points and an extendable bottom leg. The extended foot increases the contact area on the ground.

Features and fitment

• Model: i:SY P12 ZR.
• Black adjustable kickstand; length approximately 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 screws, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. A suitable mounting point with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bike and check for clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing are required on the appropriate left rear part of the frame. Also, check the required kickstand length and clearance near the brake and chain.

Stable support when parking

• Attach the kickstand to the designated part of the frame and adjust the length for a moderate tilt of the parked vehicle. A setting that is too short or too long will reduce stability.
• Ensure that the folded kickstand does not hit the wheel, brake, or drivetrain components. The vehicle should stand stably on a firm surface before releasing your grip.
• The kickstand is intended for parking. Do not load it with additional body weight while sitting on the vehicle, and check the mount and screws after a hard impact.