Adjustable bike kickstand – M6 mount, 40 mm spacing for i:SY XXL P12 ZR Adventure

Shorter adjustable kickstand with an extended foot

The black kickstand for compatible 20–22-inch bicycles features two mounting points and an extendable bottom leg. The extended foot increases the contact surface area on the ground.

Features and fitment

• Model: i:SY XXL P12 ZR Adventure.
• Black adjustable kickstand; length approximately 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 bolts, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. A compatible mounting interface with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bicycle and check for clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing on the appropriate rear left part of the frame are required. Also, check the necessary length of the kickstand and the clearance around the brake and chain.

Stable support when parking

• Attach the kickstand to the designated frame section and adjust the length for a moderate tilt of the parked vehicle. An adjustment that is too short or too long will reduce stability.
• Ensure that the folded kickstand does not hit the wheel, brake, or drive components. The vehicle should stand securely on solid ground before releasing your grip.
• The kickstand is intended for parking only. Do not apply additional body weight while sitting on the vehicle, and check the bracket and bolts after any significant impact.