Adjustable bike kickstand – M6 mount, 40 mm spacing for i:SY XXL P12 ZR

Shorter adjustable kickstand with extended foot

The black kickstand for a compatible 20–22-inch bike has two mounting points and an extendable lower leg. The extended foot increases the contact surface on the ground.

Features and fitment

• Model: i:SY XXL P12 ZR.
• Black adjustable kickstand; length approximately 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 screws, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. A compatible mounting point with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bike and check the clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing are required on the corresponding left rear part of the frame. Also check the required length of the kickstand and space around the brake and chain.

Stable support when parking

• Attach the kickstand to the designated part of the frame and adjust the length for a moderate tilt of the parked vehicle. A setting that is too short or too long reduces stability.
• Check that the folded kickstand does not hit the wheel, brake, or drive components. The vehicle should stand stably on a solid surface before letting go.
• The kickstand is intended for parking. Do not load it with extra body weight while sitting on the vehicle, and check the bracket and screws after a strong impact.