NUTT semi-metallic brake pads with cooling fins for Dualtron Storm Limited

Semi-metallic NUTT brake pads with cooling fins

A pair of semi-metallic NUTT brake pads with black backing plates featuring prominent cooling fins. Metal particles in the resin binder form the friction material, while the fins increase the surface area for heat dissipation. The included spring and retaining clip keep the pads in the correct position within the caliper.

Features and Compatibility

• Model: Dualtron Storm Limited.
• Brake pad compound: semi-metallic.
• Black backing plates with NUTT branding and cooling fins.
• Pair of pads with spring and cotter pin.

Before replacing, compare the overall profile, the retaining clip hole, and the clearance above the caliper. The finned backing plate requires sufficient clearance from the caliper and other parts of the brake assembly.

Use is only applicable for the installed NUTT caliper with the correct shape and mounting interface for the pads.

Brake Pad Compound

The semi-metallic compound combines metal particles with a resin binder. This mixture represents a compromise between initial bite and thermal stress resistance. A clean disc and gradual breaking-in of the new pair are important for consistent braking performance.

When to replace and how to start

• Inspect the pads in case of reduced braking performance, uneven wear, or contamination. Always replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.
• Remove the retaining clip and the old pair. Prepare the space for the new pads according to the procedure for your specific caliper, then insert the spring, the new pair, and the retaining clip. Do not grease the friction surfaces.
• Check for free wheel rotation and lever operation. Bed in the new pads with several gradual decelerations in a safe area, without locking the wheel.