ULIP 100/55-6.5 road self-sealing tubeless tire for Dualtron Ultra 2

ULIP 100/55-6.5 road self-sealing tubeless tire for Dualtron Ultra 2

The ULIP 100/55-6.5 tubeless tire combines a wide road surface with angled channels and an internal sealing layer. It is installed without a separate inner tube on a compatible rim.

Features and fitment

• Model: Dualtron Ultra 2.
• ULIP 100/55-6.5; road profile; tubeless with a sealing layer.

Approximate dimensions

• Outer diameter: 257 mm.
• Inner diameter: 163 mm.
• Width: 107 mm.

The sealing layer can limit air leakage from small tread punctures. In the event of a pressure drop, always inspect the tire casing, valve, and rim bead; a damaged sidewall or a large cut will require professional repair or replacement.

Tire inspection and installation

• Replace the tire if the tread is worn or if there are cracks, bulges, or damage to the rim bead. Before installation, remove any debris and check the condition of the rim.
• Deflate the wheel, remove the old tire, and install the new one without damaging the bead. Observe any rotation direction arrows.
• Set the pressure according to the allowed values for the bike and load. Check for even seating and free rotation; recheck the pressure before your next ride.