Semi-metallic NUTT brake pads for Kaabo Wolf Warrior 11

Full-metal pads for compatible NUTT calipers

Black carriers with side tabs and a rectangular friction surface form a pair of full-metal pads. The friction area measures approximately 30 × 17 mm; a spring and safety pin are included.

Features and fitment

• Model: Kaabo Wolf Warrior 11.
• Brake compound: full-metal.
• Black pads with approximately 30 mm wide and 17 mm high lining.
• Pair with spring and cotter pin; shape for compatible NUTT calipers.

Approximate dimensions

• Friction surface: 30 × 17 mm.

The 30 × 17 mm data refers to the friction surface, not the entire outline. Before replacing, check the installed caliper and the position of the mounting tabs, especially for vehicles with upgraded brakes.

Use applies only to installed NUTT calipers with the correct shape and pad mounting.

Brake compound

Full-metal compound combines metal particles and a resin binder. The mixture represents a compromise between initial bite and thermal load resistance. A clean disc and gradual break-in of the new pair are important for consistent braking.

When to replace and how to start

• Inspect the pads if braking performance decreases, wear is uneven, or they are contaminated. Replace both pads in the same caliper; check the brake manual for the minimum allowed thickness.
• Remove the safety pin and the old pair. Prepare space for the new pads according to your caliper's procedure, then insert the spring, new pair, and safety pin. Do not apply grease to friction surfaces.
• Check the wheel's free spin and lever operation. Break in the new pads with several gradual decelerations in a safe area, without locking the wheel.