Black ergonomic grips for Joyor F5 – 120 mm grip area, 131 mm total

Ergonomic black grips with dual locking clamps

This pair of black grips features a textured surface and integrated palm rests. The dual locking clamps prevent the grips from rotating once properly installed on the handlebars.

Features and compatibility

• Model: Joyor F5.
• Pair of ergonomic black grips with palm rest.
• Grip surface: 120 mm; total length: 131 mm.
• Mounting diameter: 22.2 mm; dual locking clamps.

Approximate dimensions

• Grip length: 120 mm.
• Total length: 131 mm.
• Inner end diameter: 32 mm.
• Palm rest width: 44 mm.
• Clamping diameter: 22.2 mm.

The grip area is 120 mm, with a total length of approximately 131 mm including the end caps. The inner diameter is 22.2 mm. Before installation, check for clearance near the throttle and brake levers; do not force the right grip if you use a twist throttle.

Adjusting the grip and palm rest

• Remove the old grips and clean and dry the handlebars. Ensure the new grip slides fully onto the designated tube area before fastening.
• Adjust the position to suit a relaxed wrist angle and easy access to the brake levers. Tighten the locking clamps as instructed, ensuring the grip does not rotate.
• Verify that the throttle returns freely. Replace worn, hardened, or slippery grips; do not apply lubricant to the grip surface.