Black ergonomic grips for Joyor F5S+ – 120 mm grip, 131 mm total

Ergonomic black grips with clamps on both ends

The pair of black grips features a textured surface and an extended palm rest. Clamps on both ends restrict the rotation of the properly installed grip on the handlebar.

Features and compatibility

• Model: Joyor F5S+.
• Pair of black ergonomic grips with palm rest.
• Grip section 120 mm; total length 131 mm.
• 22.2 mm mounting; clamps on both ends.

Approximate dimensions

• Grip section length: 120 mm.
• Total length: 131 mm.
• Diameter at the inner end: 32 mm.
• Rest width: 44 mm.
• Mounting diameter: 22.2 mm.

The grip section measures 120 mm, and the total length with end caps is approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the space next to the throttle and brake lever; do not force the replacement if the right-side grip is shorter due to a twist-throttle.

Adjusting the rest and grip

• Remove the old grips, then clean and dry the handlebar. Before tightening, ensure that the new grip sits completely on the intended part of the tube.
• Adjust the position for a relaxed wrist and reach to the brake lever. Tighten the clamping parts, where present, according to the instructions and verify that the grip does not rotate.
• Check for free throttle return. Replace torn, hardened, or slippery grips; do not apply lubricant to the grip surface.