Black ergonomic grips for Joyor GS5 – grip length 120 mm, total 131 mm

Ergonomic black grips with locking collars at both ends

This pair of black grips features a textured surface and flared palm rests. Locking collars at both ends prevent the properly installed grip from rotating on the handlebars.

Features and fitment

• Model: Joyor GS5.
• Pair of black ergonomic grips with palm rests.
• Grip area 120 mm; total length 131 mm.
• Mounting diameter 22.2 mm; locking collars at both ends.

Approximate dimensions

• Grip area length: 120 mm.
• Total length: 131 mm.
• Inner end diameter: 32 mm.
• Rest width: 44 mm.
• Mounting diameter: 22.2 mm.

The grip area measures 120 mm, with a total length including end caps of approximately 131 mm. The inner diameter is 22.2 mm. Before assembly, check the clearance for the throttle and brake lever; do not force the replacement of a shorter right-hand grip if you have a twist throttle.

Adjustment of rest and grip

• Remove the old grips and clean and dry the handlebars. Before securing, ensure that the new grip sits perfectly on the intended part of the bar.
• Adjust the position to suit your relaxed wrist angle and reach to the brake lever. Tighten the locking components where present according to the instructions and verify that the grip does not rotate.
• Check for free return of the throttle. Replace torn, hardened, or slippery grips; do not apply lubricant to the grip surface.