Black ergonomic grips for Joyor S5 – grip 120 mm, total 131 mm

Ergonomic black grips with double locking clamps

These black grips feature a textured surface and extended palm rest. Clamps on both ends prevent the properly installed grip from rotating on the handlebar.

Features and Compatibility

• Model: Joyor S5.
• Pair of black ergonomic grips with palm rest.
• 120 mm grip area; 131 mm total length.
• 22.2 mm handlebar mount; clamps on both ends.

Approximate dimensions

• Grip area length: 120 mm.
• Total length: 131 mm.
• Diameter at inner end: 32 mm.
• Rest width: 44 mm.
• Mounting diameter: 22.2 mm.

The grip area is 120 mm, and the total length with end caps is approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the available space near the throttle and brake lever; do not force shorter right-side grips onto a rotary throttle.

Palm rest and grip adjustment

• Remove the old grips, then clean and dry the handlebar. Ensure the new grip fully sits on the intended part of the tube before tightening.
• Adjust the position to suit your relaxed wrist angle and reach to the brake lever. Tighten the locking components, if present, according to instructions and ensure the grip does not rotate.
• Verify that the throttle moves freely. Replace torn, hardened, or slippery grips; do not apply lubricants to the gripping surface.