Black ergonomic handlebar grips for Teverun Blade Mini Pro – grip area 120 mm, total 131 mm

Ergonomic black grips with clamps on both ends

The pair of black grips features a textured surface and an extended palm rest. Clamps on both ends prevent the correctly installed grip from rotating on the handlebar.

Features and fitment

• Model: Teverun Blade Mini Pro.
• Pair of black ergonomic grips with palm rest.
• Grip area 120 mm; total length 131 mm.
• Clamp 22.2 mm; clamps on both ends.

Approximate dimensions

• Grip length: 120 mm.
• Total length: 131 mm.
• Diameter at the inner end: 32 mm.
• Rest width: 44 mm.
• Clamp diameter: 22.2 mm.

The grip area measures 120 mm, and the total length with the ends is approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the clearance near the throttle and brake lever; do not force the shorter right grip onto a twist throttle.

Palm rest and grip adjustment

• Remove the old grips, then clean and dry the handlebar. Before securing, check that the new grip fits fully onto the designated part of the bar.
• Adjust the position to suit your relaxed wrist angle and brake lever reach. Tighten the clamping parts, where present, according to the instructions and verify that the grip does not rotate.
• Check for free throttle return. Replace torn, hardened, or slippery grips; do not apply lubricant to the grip surface.