Black ergonomic handlebar grips for Teverun Space

Ergonomic black grips with clamps at both ends

The pair of black grips features a textured surface and extended palm support. Clamps at both ends prevent the correctly installed grip from rotating on the handlebars.

Features and fitment

• Model: Teverun Space.
• Pair of black ergonomic grips with palm support.
• Grip area 120 mm; total length 131 mm.
• Mounting 22.2 mm; clamps at both ends.

Approximate dimensions

• Grip length: 120 mm.
• Total length: 131 mm.
• Diameter at the inner end: 32 mm.
• Support width: 44 mm.
• Mounting diameter: 22.2 mm.

The grip area measures 120 mm, and the total length with end caps is approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the space around the throttle and brake lever; do not force the installation of shorter right-side grips next to a twist throttle.

Adjusting support and grip

• Remove the old grips, then clean and dry the handlebars. Before fastening, check that the new grip sits completely on the intended part of the tube.
• Adjust the position to your wrist's natural relaxation point and reach to the brake lever. Tighten the clamping parts, where present, according to the instructions and verify that the grip does not rotate.
• Check for free return of the throttle. Replace torn, hardened, or slippery grips; do not apply lubricant to the gripping surface.