160 mm brake disc with 44 mm pitch circle for ENGWE Engine X

160 mm brake disc for a 6-bolt hub

The 160 mm diameter brake disc features six mounting holes on a 44 mm bolt circle. The silver braking surface is perforated and connected to the mounting section via inner spokes.

Features and Compatibility

• Model: ENGWE Engine X.
• 160 mm diameter; 6 holes; 44 mm bolt hole circle.
• Six bolts.

Approximate Dimensions

• Disc diameter: 160 mm.
• Mounting hole circle: 44 mm.
• Distance between adjacent holes: 22 mm.

The set includes six bolts. When selecting, compare the disc diameter, mounting hole circle, and caliper position; a larger disc requires an appropriate brake setup.

Disc Replacement and Alignment

• Replace the disc if cracks, permanent deformation, or wear below the minimum thickness are observed. If rubbing occurs, also check the caliper alignment.
• Clean the hub mounting surface and install the disc in the indicated direction of rotation. Tighten the bolts gradually in a cross pattern to the specified torque.
• Keep the braking surface clean and free of grease. After assembly, check for smooth rotation and proper braking; new discs and pads require a proper bedding-in process.