Brake disc 160 mm with 44 mm BCD for ENGWE P275 SE

160 mm disc for six-bolt hub

The 160 mm diameter brake disc features six mounting points on a 44 mm circle. The silver braking surface is perforated, and inner arms connect it to the mounting section.

Features and fitment

• Model: ENGWE P275 SE.
• Diameter 160 mm; 6 holes; mounting hole circle 44 mm.
• Six bolts.

Approximate dimensions

• Disc diameter: 160 mm.
• Mounting circle: 44 mm.
• Distance between adjacent holes: 22 mm.

The set includes six bolts. When selecting, compare the disc diameter, mounting circle, and caliper position; a larger disc also requires an appropriate brake setup.

Disc replacement and alignment

• Replace the disc in case of cracks, permanent deformation, or wear below the minimum thickness. If rubbing occurs, first check the caliper alignment.
• Clean the hub contact surface and install the disc in the marked rotation direction. Tighten the bolts gradually in a cross pattern to the specified torque.
• Keep the braking surface clean and free of oil. After assembly, check for free rotation and braking performance; a new disc and pads require proper bedding-in.