160 mm brake disc with 44 mm bolt pattern for ENGWE ZIP

160 mm brake disc for 6-bolt hub

The 160 mm diameter brake disc features six mounting points on a 44 mm circle. The silver braking surface is perforated, and the inner arms connect it to the mounting part.

Features and compatibility

• Model: ENGWE ZIP.
• 160 mm diameter; 6 holes; 44 mm bolt circle diameter (BCD).
• Six bolts.

Approximate dimensions

• Disc diameter: 160 mm.
• Mounting circle: 44 mm.
• Distance between adjacent holes: 22 mm.

The set includes six bolts. When choosing, compare the disc diameter, mounting circle, and caliper position; a larger disc requires appropriate brake adjustment.

Changing and aligning the disc

• Replace the disc if there are cracks, permanent deformation, or wear below the minimum allowable thickness. If rubbing occurs, also check the caliper alignment first.
• Clean the hub mounting surface and install the disc in the marked direction of rotation. Tighten the bolts gradually in a cross pattern to the specified torque.
• Keep the braking surface clean and free of grease. After assembly, check free rotation and braking; a new disc and pads require proper break-in.