Adjustable bike stand – M6 mount, 40 mm spacing for i:SY E5 ZR F CX Century

Short adjustable kickstand with extended foot

The black kickstand for a suitable 20–22-inch bike has two mounting points and an extendable bottom leg. The extended foot increases the contact surface area on the ground.

Features and Compatibility

• Model: i:SY E5 ZR F CX Century.
• Black adjustable kickstand; length approx. 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate Dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 screws, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. A suitable mounting point with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bike and check clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing on the corresponding left rear frame section are required. Also check the necessary kickstand length and clearance near the brake and chain.

Stable Parking Support

• Attach the kickstand to the intended part of the frame and adjust the length for a moderate tilt when the vehicle is parked. A setting that is too short or too long reduces stability.
• Ensure the folded kickstand does not strike the wheel, brake, or drivetrain components. The vehicle should stand stably on a firm surface before you dismount.
• The kickstand is intended for parking only. Do not subject it to additional body weight while sitting on the vehicle, and check the mount and screws after any heavy impact.