Adjustable bike stand – M6 mounting, 40 mm spacing for i:SY XXL E5 ZR F CX

Shorter adjustable kickstand with an extended foot

The black kickstand for a compatible 20–22-inch bike has two mounting points and an extendable lower leg. The extended foot increases the contact surface on the ground.

Features and fitment

• Model: i:SY XXL E5 ZR F CX.
• Black adjustable kickstand; length approx. 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 screws, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. A suitable mounting point with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bike and check clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing on the corresponding rear-left part of the frame are required. Also, check the required length of the kickstand and space by the brake and chain.

Stable support when parking

• Attach the kickstand to the intended part of the frame and adjust the length for a moderate tilt of the parked vehicle. A setting that is too short or too long will reduce stability.
• Ensure that the folded kickstand does not hit the wheel, brake, or drivetrain components. The vehicle should stand stable on a solid surface before releasing your grip.
• The kickstand is intended for parking. Do not load it with additional body weight while sitting on the vehicle, and check the bracket and screws after any strong impact.