Green Ceramic Brake Pads ZOOM for ENGWE Engine X Electric Bike

Green ceramic pads in a wide ZOOM shape

Wide green carriers have a rectangular friction pad and an upper tab for a retainer. The pair of ceramic pads is complemented by a spreader spring and cotter pin.

Features and fitment

• Model: ENGWE Engine X.
• Brake compound: ceramic.
• Green rectangular carrier pads for the corresponding ZOOM shape; ceramic compound; spring and cotter pin.

Before replacing, compare the width and height of the pad, the mounting tab, and the position of the retainer. Install the ceramic pair with the appropriate spreader spring and bed them in after adjusting the brake.

Only for an installed brake caliper with the ZOOM pad shape specified for this product. Before choosing, you must compare the old pad; the same vehicle model may be equipped with a different caliper.

Brake compound

A ceramic compound forms the friction surface of the pads. For even contact with the disc, gradually bed in the new pair after installation. Keep the pad clean and dry; oil or grease on the friction surface reduces braking performance.

When to replace and how to start

• Inspect the pads if braking performance decreases, or if there is uneven wear or contamination. Replace both pads in the same caliper; check the brake manufacturer's manual for the minimum allowed thickness.
• Remove the retainer and the old pair. Prepare the space for new pads according to the procedure for your specific caliper, then insert the spring, the new pair, and the retainer. Do not grease the friction surfaces.
• Check for free wheel rotation and lever operation. Bed in the new pads with several gradual decelerations in a safe area, without locking the wheel.