Green ceramic ZOOM brake pads for ENGWE EP-2 Pro electric bike

Green ceramic brake pads, wide ZOOM shape

The wide green backing plates feature rectangular friction material and an upper tab for a retaining pin. The pair of ceramic pads comes with a spreader spring and a cotter pin.

Features and fitment

• Model: ENGWE EP-2 Pro.
• Brake compound: ceramic.
• Green rectangular backing plates for the appropriate ZOOM shape; ceramic compound; spring and cotter pin.

Before replacing, compare the pad's width and height, mounting tab, and position of the retaining pin. Install the ceramic pair with the appropriate spreader spring and bed them in after adjusting the brake.

Only for brake calipers with the ZOOM pad shape specified for this product. Be sure to compare with the old pad before selecting; the same vehicle model may be equipped with a different caliper.

Brake compound

The ceramic compound forms the friction surface of the pads. To ensure even contact with the disc, gradually bed in the new pair after installation. Keep the pads clean and dry; oil or grease on the friction surface reduces braking performance.

When to replace and how to start

• Inspect the pads in case of poor braking, uneven wear, or contamination. Always replace both pads in the same caliper; check the minimum allowed thickness in your brake manual.
• Remove the retaining pin and the old pair. Prepare the space for the new pads according to your specific caliper procedure, then insert the spring, the new pair, and the retaining pin. Do not grease the friction surfaces.
• Check for free wheel movement and lever operation. Bed in the new pads by performing several gradual decelerations in a safe area, without locking the wheel.