Adjustable kickstand – M6 mounting, 40 mm spacing for ENGWE Engine Pro

Shorter adjustable kickstand with widened foot

Black kickstand for suitable 20–22 inch bikes, featuring two mounting points and an extendable bottom leg. The widened foot increases the contact surface area on the ground.

Features and fitment

• Model: ENGWE Engine Pro.
• Black adjustable kickstand; length approximately 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 bolts, 40 mm spacing.

Length is adjustable from approximately 300 to 367 mm. An appropriate mounting point with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bike and check clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing are required on the appropriate left rear part of the frame. Also check the required kickstand length and clearance from the brake and chain.

Stable parking support

• Attach the kickstand to the designated frame section and adjust the length for a moderate tilt of the parked vehicle. Adjusting it too short or too long reduces stability.
• Ensure the folded kickstand does not strike the wheel, brake, or drivetrain components. The vehicle should stand stably on firm ground before releasing your grip.
• The kickstand is intended for parking only. Do not add extra body weight while sitting on the vehicle, and check the mount and bolts after any strong impact.